SICA 10 SR 2 CP 4 Ohms
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 35.3 Hz |
| Qts | 0.396 |
| Qes | 0.42 |
| Qms | 6.87 |
| Vas | 54.9 L |
| Sd | 353 cm² |
| Xmax | 5.3 mm |
| Re | 3.28 Ω |
| Bl | 10.6 T·m |
| Mms | 64.7 g |
| Pe | 150 W |
| Sensitivity | 93.4 dB |
Alignment hint
| EBP | 84 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SICA 10 SR 2.5 CP 4 Ohms | 35.3 = | 0.396 = | 54.9 = | 5.3 = | 93.4 = | close | + | |
| Soundstream SS-10R | 35 -0.3 | 0.375 -0.02 | 51 -3.9 | 6 +0.7 | 93.7 +0.3 | close | + | |
| Dayton Audio SIG270-4 | 35 -0.3 | 0.413 +0.02 | 58.3 +3.4 | 4.8 -0.5 | 92.8 -0.6 | close | Xmax 4.8 mm < 5.3 mm: lower excursion-limited SPL | + |
| Volt DVC251.7 | 32 -3.3 | 0.387 -0.01 | 53 -1.9 | 7.8 +2.5 | 92.6 -0.8 | close | + | |
| SICA 10 H 2 CS 8 Ohms | 36 +0.7 | 0.393 = | 65.4 +10.5 | 6 +0.7 | 91.8 -1.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| SICA 10 SR 2 PL Z006004 | 33.6 -1.7 | 0.423 +0.03 | 66.5 +11.6 | 6.5 +1.2 | 93.3 -0.1 | close | + | |
| Cobalt CS 10 DVC parallele | 30 -5.3 | 0.387 -0.01 | 60 +5.1 | 6 +0.7 | 94.3 +0.9 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Focal 11K 7512 | 38 +2.7 | 0.353 -0.04 | 51.9 -3 | 5.3 = | 91.6 -1.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 10FE330 | 35 -0.3 | 0.4 = | 72.4 +17.5 | 8.32 +3.02 | 92 -1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Davis 25GC10R | 37.2 +1.9 | 0.397 = | 80.9 +26 | 5.7 +0.4 | 93.5 +0.1 | close | 8 Ω vs 4 Ω: amp load changes · 100 W vs 150 W: lower power handling | + |
Compare the closest 3 against the 10 SR 2 CP 4 Ohms →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.