Sica 10 SR 2.5 CP
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 34.5 Hz |
| Qts | 0.32 |
| Qes | 0.34 |
| Qms | 6.35 |
| Vas | 66.7 L |
| Sd | 353 cm² |
| Xmax | 6 mm |
| Re | 5.2 Ω |
| Bl | 13.7 T·m |
| Mms | 56.5 g |
| Pe | 300 W |
| Sensitivity | 93 dB |
Alignment hint
| EBP | 101 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 17.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SICA 10 SR 2.5 CP 8 Ohms v2017 | 34.5 = | 0.323 = | 66.7 = | 6 = | 92.9 -0.1 | close | + | |
| Visaton TIW250XS 8 Ohms v2 | 33 -1.5 | 0.328 +0.01 | 66 -0.7 | 7.9 +1.9 | 91.8 -1.2 | close | 200 W vs 300 W: lower power handling | + |
| AE Speakers TD10S v2015 | 32.7 -1.8 | 0.346 +0.03 | 68 +1.3 | 7 +1 | 93.4 +0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| AE Speakers TD10S | 32.7 -1.8 | 0.347 +0.03 | 67.5 +0.8 | 7 +1 | 91.4 -1.6 | close | + | |
| AE Speakers TD10X | 35 +0.5 | 0.27 -0.05 | 67.5 +0.8 | 7 +1 | 92.4 -0.6 | close | + | |
| Triangle T28DE120C | 30 -4.5 | 0.327 +0.01 | 73.1 +6.4 | 6.5 +0.5 | 92.2 -0.8 | close | 150 W vs 300 W: lower power handling | + |
| Audax HT240G4 | 28 -6.5 | 0.302 -0.02 | 67 +0.3 | 8 +2 | 93 = | close | 4 Ω vs 8 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
| Alpine SWG-1044 | 33 -1.5 | 0.34 +0.02 | 65 -1.7 | 8 +2 | 89.8 -3.2 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Decware DHM 108B | 35 +0.5 | 0.316 = | 53 -13.7 | 5.5 -0.5 | 91 -2 | close | Xmax 5.5 mm < 6 mm: lower excursion-limited SPL | + |
| SICA 10 H 2 CS 8 Ohms | 36 +1.5 | 0.393 +0.07 | 65.4 -1.3 | 6 = | 91.8 -1.2 | close | 150 W vs 300 W: lower power handling | + |
Compare the closest 3 against the 10 SR 2.5 CP →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.