SICA 10 S 3 PL v2017
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 43 Hz |
| Qts | 0.265 |
| Qes | 0.28 |
| Qms | 4.8 |
| Vas | 39.9 L |
| Sd | 346.4 cm² |
| Xmax | 6.1 mm |
| Re | 5.1 Ω |
| Bl | 16.9 T·m |
| Mms | 57.8 g |
| Pe | 400 W |
| Sensitivity | 94.5 dB |
Alignment hint
| EBP | 154 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 10 S 3 PL | 43 = | 0.27 +0.01 | 39.9 = | 7 +0.9 | 94.5 = | close | + | |
| Sica 10 PN 3 | 48.1 +5.1 | 0.26 -0.01 | 40.1 +0.2 | 7 +0.9 | 96.1 +1.6 | close | + | |
| SICA 10 S 3 CP v2017 | 43 = | 0.313 +0.05 | 39.9 = | 7 +0.9 | 93.6 -0.9 | close | + | |
| Sica 10 S 3 CP | 42 -1 | 0.3 +0.03 | 42.8 +2.9 | 7 +0.9 | 94 -0.5 | close | + | |
| Sica 10 K 3 PL | 50.6 +7.6 | 0.26 -0.01 | 40 +0.1 | 6.5 +0.4 | 96.7 +2.2 | close | + | |
| 18 Sound 10NTLS2000 | 50 +7 | 0.26 -0.01 | 38 -1.9 | 7.4 +1.3 | 97 +2.5 | close | + | |
| Beyma 10MW/ND | 47 +4 | 0.26 -0.01 | 48 +8.1 | 5.9 -0.2 | 96.3 +1.8 | close | Xmax 5.9 mm < 6.1 mm: lower excursion-limited SPL | + |
| Volt BM2500.4 v2014 | 45 +2 | 0.267 = | 37 -2.9 | 4 -2.1 | 94.7 +0.2 | close | 200 W vs 400 W: lower power handling · Xmax 4 mm < 6.1 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3010LF-4 vp | 43.1 +0.1 | 0.281 +0.02 | 49.3 +9.4 | 8.4 +2.3 | 96.5 +2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MW/ND v2 | 49 +6 | 0.319 +0.05 | 40.7 +0.8 | 6.1 = | 94.8 +0.3 | close | + |
Compare the closest 3 against the 10 S 3 PL v2017 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.