SICA 10 S 3 CP v2017

10" · 8 Ω · 450 W · 93.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	43 Hz
Qts	0.313
Qes	0.34
Qms	4.02
Vas	39.9 L
Sd	346.4 cm²
Xmax	7 mm
Re	5.1 Ω
Bl	15.3 T·m
Mms	57.8 g
Pe	450 W
Sensitivity	93.6 dB

Alignment hint

EBP	126 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 9.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Sica 10 S 3 CP	42 -1	0.3 -0.01	42.8 +2.9	7 =	94 +0.4	close		+
Beyma 10MW/ND	49 +6	0.32 +0.01	40.7 +0.8	7.5 +0.5	93.5 -0.1	close	6 Ω vs 8 Ω: amp load changes · 350 W vs 450 W: lower power handling	+
Sica 10 S 3 PL	43 =	0.27 -0.04	39.9 =	7 =	94.5 +0.9	close		+
Faital PRO 10RS350	40 -3	0.31 =	40.6 +0.7	7.17 +0.17	91 -2.6	close	4 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling	+
Eminence KAPPALITE™ KL3010LF-8	45 +2	0.31 =	47.33 +7.43	8.52 +1.52	92 -1.6	close		+
Beyma 10MW/ND v2	49 +6	0.319 +0.01	40.7 +0.8	6.1 -0.9	94.8 +1.2	close	350 W vs 450 W: lower power handling · Xmax 6.1 mm < 7 mm: lower excursion-limited SPL	+
Beyma 10G40 v2016	45 +2	0.306 -0.01	49 +9.1	6.6 -0.4	94.5 +0.9	close	Xmax 6.6 mm < 7 mm: lower excursion-limited SPL	+
SICA 10 S 3 PL v2017	43 =	0.265 -0.05	39.9 =	6.1 -0.9	94.5 +0.9	close	Xmax 6.1 mm < 7 mm: lower excursion-limited SPL	+
Beyma 10"G40	45 +2	0.3 -0.01	49 +9.1	7 =	95 +1.4	close		+
Ciare FXE 10-2.5	46 +3	0.358 +0.04	41.6 +1.7	6 -1	93.6 =	close	300 W vs 450 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10 S 3 CP v2017 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.