Sica 10 PN 3
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48.1 Hz |
| Qts | 0.26 |
| Qes | 0.28 |
| Qms | 4.36 |
| Vas | 40.1 L |
| Sd | 346.4 cm² |
| Xmax | 7 mm |
| Re | 5.1 Ω |
| Bl | 16.06 T·m |
| Mms | 46.4 g |
| Pe | 400 W |
| Sensitivity | 96.1 dB |
Alignment hint
| EBP | 172 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 10 K 3 PL | 50.6 +2.5 | 0.26 = | 40 -0.1 | 6.5 -0.5 | 96.7 +0.6 | close | Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLS2000 | 50 +1.9 | 0.26 = | 38 -2.1 | 7.4 +0.4 | 97 +0.9 | close | + | |
| Sica 10 S 3 PL | 43 -5.1 | 0.27 +0.01 | 39.9 -0.2 | 7 = | 94.5 -1.6 | close | + | |
| Beyma 10MW/ND | 47 -1.1 | 0.26 = | 48 +7.9 | 5.9 -1.1 | 96.3 +0.2 | close | Xmax 5.9 mm < 7 mm: lower excursion-limited SPL | + |
| SICA 10 S 3 PL v2017 | 43 -5.1 | 0.265 +0.01 | 39.9 -0.2 | 6.1 -0.9 | 94.5 -1.6 | close | Xmax 6.1 mm < 7 mm: lower excursion-limited SPL | + |
| 18 Sound 10NW650 | 51 +2.9 | 0.28 +0.02 | 48 +7.9 | 7 = | 96 -0.1 | close | 300 W vs 400 W: lower power handling | + |
| 18 Sound 10NW650 | 51 +2.9 | 0.27 +0.01 | 50 +9.9 | 7 = | 95.5 -0.6 | close | 16 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| B&C 10 PS 26 (prodance) | 53.4 +5.3 | 0.267 +0.01 | 39.5 -0.6 | 5.4 -1.6 | 96.8 +0.7 | close | Xmax 5.4 mm < 7 mm: lower excursion-limited SPL | + |
| Sica 10 N 3 PL | 51 +2.9 | 0.29 +0.03 | 40.5 +0.4 | 5.5 -1.5 | 96.1 = | close | Xmax 5.5 mm < 7 mm: lower excursion-limited SPL | + |
| Faital PRO 10PR320 | 48 -0.1 | 0.29 +0.03 | 52.7 +12.6 | 7.37 +0.37 | 96 -0.1 | close | 300 W vs 400 W: lower power handling | + |
Compare the closest 3 against the 10 PN 3 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.