Sica 10 N 2.5 PL
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 57 Hz |
| Qts | 0.36 |
| Qes | 0.39 |
| Qms | 4.25 |
| Vas | 40.9 L |
| Sd | 346.4 cm² |
| Xmax | 4.5 mm |
| Re | 5.5 Ω |
| Bl | 12.8 T·m |
| Mms | 32.5 g |
| Pe | 300 W |
| Sensitivity | 96.6 dB |
Alignment hint
| EBP | 146 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 14.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SICA 10 N 2.5 PL v2017 | 57 = | 0.357 = | 40.9 = | 4.5 = | 96.5 -0.1 | close | + | |
| SICA 10 FE 2.5 CP v2017 | 57 = | 0.365 +0.01 | 39.7 -1.2 | 4 -0.5 | 96.3 -0.3 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Sica 10 Fe 2.5 CP | 57 = | 0.37 +0.01 | 39.7 -1.2 | 4 -0.5 | 96.3 -0.3 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Ciare PFXI10.50W | 58 +1 | 0.374 +0.01 | 38.5 -2.4 | 4.4 -0.1 | 96 -0.6 | close | 220 W vs 300 W: lower power handling · Xmax 4.4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Volt BM251.3 PA | 55 -2 | 0.346 -0.01 | 44 +3.1 | 4.8 +0.3 | 96.8 +0.2 | close | 200 W vs 300 W: lower power handling | + |
| SICA 10 E 2 CS | 56 -1 | 0.347 -0.01 | 39.8 -1.1 | 4.1 -0.4 | 96 -0.6 | close | 150 W vs 300 W: lower power handling · Xmax 4.1 mm < 4.5 mm: lower excursion-limited SPL | + |
| SICA SL10B25P | 57 = | 0.348 -0.01 | 41.9 +1 | 4 -0.5 | 95.7 -0.9 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| SB Audience BIANCO-10MW200 | 58 +1 | 0.336 -0.02 | 39.3 -1.6 | 5.2 +0.7 | 96.2 -0.4 | close | + | |
| Beyma 10XC25 | 63 +6 | 0.376 +0.02 | 41 +0.1 | 4.5 = | 97.2 +0.6 | close | + | |
| Fane SOVEREIGN PRO 10-300 | 58 +1 | 0.322 -0.04 | 41 +0.1 | 4.7 +0.2 | 97.2 +0.6 | close | + |
Compare the closest 3 against the 10 N 2.5 PL →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.