Sica 10 K 3 PL
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50.6 Hz |
| Qts | 0.26 |
| Qes | 0.27 |
| Qms | 5.02 |
| Vas | 40 L |
| Sd | 346.4 cm² |
| Xmax | 6.5 mm |
| Re | 5.2 Ω |
| Bl | 16.05 T·m |
| Mms | 42.1 g |
| Pe | 400 W |
| Sensitivity | 96.7 dB |
Alignment hint
| EBP | 187 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 10NTLS2000 | 50 -0.6 | 0.26 = | 38 -2 | 7.4 +0.9 | 97 +0.3 | close | + | |
| Sica 10 PN 3 | 48.1 -2.5 | 0.26 = | 40.1 +0.1 | 7 +0.5 | 96.1 -0.6 | close | + | |
| B&C 10 PS 26 (prodance) | 53.4 +2.8 | 0.267 +0.01 | 39.5 -0.5 | 5.4 -1.1 | 96.8 +0.1 | close | Xmax 5.4 mm < 6.5 mm: lower excursion-limited SPL | + |
| Sica 10 N 3 PL | 51 +0.4 | 0.29 +0.03 | 40.5 +0.5 | 5.5 -1 | 96.1 -0.6 | close | Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL | + |
| 18 Sound 10NW650 | 51 +0.4 | 0.28 +0.02 | 48 +8 | 7 +0.5 | 96 -0.7 | close | 300 W vs 400 W: lower power handling | + |
| Beyma 10MW/ND | 47 -3.6 | 0.26 = | 48 +8 | 5.9 -0.6 | 96.3 -0.4 | close | Xmax 5.9 mm < 6.5 mm: lower excursion-limited SPL | + |
| 18 Sound 10NW650 | 51 +0.4 | 0.27 +0.01 | 50 +10 | 7 +0.5 | 95.5 -1.2 | close | 16 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| SICA 10 K 3 PL 8 Ohms v2017 | 50.6 = | 0.256 = | 40 = | 4 -2.5 | 96.7 = | close | Xmax 4 mm < 6.5 mm: lower excursion-limited SPL | + |
| Sica 10 S 3 PL | 43 -7.6 | 0.27 +0.01 | 39.9 -0.1 | 7 +0.5 | 94.5 -2.2 | close | + | |
| SICA 10 S 3 PL v2017 | 43 -7.6 | 0.265 +0.01 | 39.9 -0.1 | 6.1 -0.4 | 94.5 -2.2 | close | Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10 K 3 PL →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.