SICA 10 K 3 PL 4 Ohms
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 56 Hz |
| Qts | 0.265 |
| Qes | 0.27 |
| Qms | 13.33 |
| Vas | 29.2 L |
| Sd | 346.4 cm² |
| Xmax | 4 mm |
| Re | 3.1 Ω |
| Bl | 13.7 T·m |
| Mms | 46.5 g |
| Pe | 350 W |
| Sensitivity | 98.9 dB |
Alignment hint
| EBP | 207 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10 NDL 64 | 56 = | 0.267 = | 31 +1.8 | 4 = | 96.2 -2.7 | close | 8 Ω vs 4 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| PHL Audio 3490 | 54 -2 | 0.258 -0.01 | 28 -1.2 | 4.2 +0.2 | 96.9 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 10NDL64 | 56 = | 0.26 -0.01 | 31 +1.8 | 6 +2 | 97 -1.9 | close | 8 Ω vs 4 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| SICA 10K3PL | 56 = | 0.276 +0.01 | 32.6 +3.4 | 4 = | 96.7 -2.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| SICA 10 K 3 PL 8 Ohms | 55.9 -0.1 | 0.276 +0.01 | 32.6 +3.4 | 4 = | 96.7 -2.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 10MBX64 | 65 +9 | 0.26 -0.01 | 28 -1.2 | 4 = | 100 +1.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 3420 | 53 -3 | 0.256 -0.01 | 35 +5.8 | 4.3 +0.3 | 97.6 -1.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 3540 | 50 -6 | 0.266 = | 35 +5.8 | 4.5 +0.5 | 99.7 +0.8 | close | + | |
| Eminence KAPPALITE 3010 H0 | 61.4 +5.4 | 0.263 = | 37.2 +8 | 4.4 +0.4 | 98.7 -0.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 10NTLW2000 | 57 +1 | 0.22 -0.05 | 31 +1.8 | 4.4 +0.4 | 98.5 -0.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 10 K 3 PL 4 Ohms →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.