SICA 10 FE 3 CP v2017

10" · 8 Ω · 350 W · 95.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	52 Hz
Qts	0.307
Qes	0.32
Qms	7.5
Vas	38.6 L
Sd	346.4 cm²
Xmax	4.2 mm
Re	5.6 Ω
Bl	15.3 T·m
Mms	40.8 g
Pe	350 W
Sensitivity	95.8 dB

Alignment hint

EBP	163 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Sica 10 Fe 3 CP	52 =	0.31 =	38.6 =	5 +0.8	95.9 +0.1	close		+
B&C 10 PS 26	54 +2	0.296 -0.01	38 -0.6	5.5 +1.3	96 +0.2	close		+
B&C 10PS26	54 +2	0.29 -0.02	38 -0.6	5.5 +1.3	96 +0.2	close		+
Monacor SP-10A/302PA	55 +3	0.298 -0.01	40 +1.4	4 -0.2	96.3 +0.5	close	Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Sica 10 N 3 PL	51 -1	0.29 -0.02	40.5 +1.9	5.5 +1.3	96.1 +0.3	close		+
Faital PRO 10PR310	55 +3	0.31 =	40.3 +1.7	4.92 +0.72	97 +1.2	close	4 Ω vs 8 Ω: amp load changes	+
PRV Audio 10MB500	50.5 -1.5	0.313 +0.01	46.2 +7.6	4.3 +0.1	94.8 -1	close	250 W vs 350 W: lower power handling	+
Beyma 10MW/ND v2	49 -3	0.319 +0.01	40.7 +2.1	6.1 +1.9	94.8 -1	close		+
Beyma 10G40	55 +3	0.314 +0.01	33 -5.6	5 +0.8	95.4 -0.4	close		+
SICA 10 L 2.5 SL	54 +2	0.326 +0.02	43.8 +5.2	4 -0.2	96.2 +0.4	close	250 W vs 350 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10 FE 3 CP v2017 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.