Sica 10 Fe 3 CP

10" · 8 Ω · 450 W · 95.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	52 Hz
Qts	0.31
Qes	0.32
Qms	7.5
Vas	38.6 L
Sd	346.4 cm²
Xmax	5 mm
Re	5.6 Ω
Bl	15.35 T·m
Mms	41.4 g
Pe	450 W
Sensitivity	95.9 dB

Alignment hint

EBP	163 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 9.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
SICA 10 FE 3 CP v2017	52 =	0.307 =	38.6 =	4.2 -0.8	95.8 -0.1	close	350 W vs 450 W: lower power handling · Xmax 4.2 mm < 5 mm: lower excursion-limited SPL	+
B&C 10 PS 26	54 +2	0.296 -0.01	38 -0.6	5.5 +0.5	96 +0.1	close	350 W vs 450 W: lower power handling	+
B&C 10PS26	54 +2	0.29 -0.02	38 -0.6	5.5 +0.5	96 +0.1	close	350 W vs 450 W: lower power handling	+
Faital PRO 10PR310	55 +3	0.31 =	40.3 +1.7	4.92 -0.08	97 +1.1	close	4 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling · Xmax 4.92 mm < 5 mm: lower excursion-limited SPL	+
Sica 10 N 3 PL	51 -1	0.29 -0.02	40.5 +1.9	5.5 +0.5	96.1 +0.2	close		+
Beyma 10MW/ND v2	49 -3	0.319 +0.01	40.7 +2.1	6.1 +1.1	94.8 -1.1	close	350 W vs 450 W: lower power handling	+
Beyma 10G40	55 +3	0.314 =	33 -5.6	5 =	95.4 -0.5	close		+
SB Audience BIANCO-10MW200	58 +6	0.336 +0.03	39.3 +0.7	5.2 +0.2	96.2 +0.3	close		+
18 Sound 10NW750	53 +1	0.31 =	34 -4.6	7.5 +2.5	94 -1.9	close		+
Faital PRO 10PR310 4 Ohms	55 +3	0.307 =	35.2 -3.4	4.9 -0.1	98.5 +2.6	close	4 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling · Xmax 4.9 mm < 5 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10 Fe 3 CP →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.