← all drivers

SICA 10 FE 2 CP

10" · 8 Ω · 150 W · 95.5 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs55.7 Hz
Qts0.415
Qes0.45
Qms5.37
Vas45.9 L
Sd346.4 cm²
Xmax4 mm
Re6.2 Ω
Bl12 T·m
Mms29.9 g
Pe150 W
Sensitivity95.5 dB

Alignment hint

EBP124 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 24.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 10CMV252 -3.70.418 =44 -1.95.2 +1.294.5 -1close+
Eminence DELTALITE II 251053 -2.70.417 =52.5 +6.64.2 +0.296.4 +0.9close+
Beyma 10CM/V252 -3.70.42 +0.0144 -1.96.5 +2.595 -0.5close+
LaVoce NBASS10-2052 -3.70.39 -0.0243.38 -2.526.6 +2.695.5 =close+
Eminence BASSLITE CH201058 +2.30.438 +0.0243 -2.93.5 -0.596.2 +0.7closeXmax 3.5 mm < 4 mm: lower excursion-limited SPL+
Eminence DELTALITE II 2510 (prodance)53.4 -2.30.384 -0.0350.9 +54.2 +0.296.9 +1.4close+
B&C 10 HPL 5155 -0.70.367 -0.0550 +4.14 =97.1 +1.6close+
Sica 10 Fe 2.5 CP57 +1.30.37 -0.0439.7 -6.24 =96.3 +0.8close+
SICA SL10B25P57 +1.30.348 -0.0741.9 -44 =95.7 +0.2close+
Beyma 10"WRS 30052 -3.70.38 -0.0342 -3.96 +295 -0.5close+

Compare the closest 3 against the 10 FE 2 CP →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.