SEAS W26FX001
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 20 Hz |
| Qts | 0.349 |
| Qes | 0.41 |
| Qms | 2.34 |
| Vas | 162 L |
| Sd | 330 cm² |
| Xmax | 7 mm |
| Re | 6.3 Ω |
| Bl | 10.7 T·m |
| Mms | 59.7 g |
| Pe | 150 W |
| Sensitivity | 88 dB |
Alignment hint
| EBP | 49 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 52.2 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SEAS L26RFX | 20 = | 0.341 -0.01 | 166 +4 | 7 = | 88.2 +0.2 | close | + | |
| SEAS L26RFX/P | 20 = | 0.33 -0.02 | 171 +9 | 7 = | 88.5 +0.5 | close | + | |
| Accuton AS250-8-552 | 20 = | 0.327 -0.02 | 159 -3 | 9 +2 | 87.6 -0.4 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Scan-Speak 25W/8567-SE | 22 +2 | 0.367 +0.02 | 159 -3 | 7.5 +0.5 | 89.4 +1.4 | close | + | |
| Peerless 850146 | 22.6 +2.6 | 0.346 = | 144.4 -17.6 | 7.5 +0.5 | 89.8 +1.8 | close | + | |
| Peerless CSX 257 H | 22.6 +2.6 | 0.346 = | 144.4 -17.6 | 9 +2 | 89.8 +1.8 | close | + | |
| Accuton AS250-8-552 v2018 | 22 +2 | 0.353 = | 119 -43 | 9 +2 | 87.6 -0.4 | close | + | |
| Peerless 831727 | 22.3 +2.3 | 0.332 -0.02 | 136.2 -25.8 | 9 +2 | 89.7 +1.7 | usable | 110 W vs 150 W: lower power handling | + |
| Scan-Speak 26W8867T00 | 19 -1 | 0.29 -0.06 | 176 +14 | 9 +2 | 89.3 +1.3 | usable | + | |
| Scan-Speak 26W/8867T00 | 19 -1 | 0.29 -0.06 | 179 +17 | 9 +2 | 89.4 +1.4 | usable | + |
Compare the closest 3 against the W26FX001 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.