SEAS CA26RE4X vp1
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 27.3 Hz |
| Qts | 0.317 |
| Qes | 0.34 |
| Qms | 4.69 |
| Vas | 143 L |
| Sd | 350 cm² |
| Xmax | 7.1 mm |
| Re | 6.1 Ω |
| Bl | 11.2 T·m |
| Mms | 40.8 g |
| Pe | 80 W |
| Sensitivity | 92.5 dB |
Alignment hint
| EBP | 80 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 36 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Scan-Speak 25W/8561 | 28 +0.7 | 0.306 -0.01 | 140 -3 | 6.5 -0.6 | 93 +0.5 | close | Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
| Focal 11V 7511 | 27 -0.3 | 0.33 +0.01 | 128.5 -14.5 | 9 +1.9 | 91.5 -1 | close | + | |
| Vifa PLW 26 452/8 | 26 -1.3 | 0.319 = | 130 -13 | 6.5 -0.6 | 91.3 -1.2 | close | Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
| SEAS CA26RFX | 29 +1.7 | 0.337 +0.02 | 129 -14 | 7 -0.1 | 92 -0.5 | close | Xmax 7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Focal 10K 516 | 27.8 +0.5 | 0.348 +0.03 | 157 +14 | 7.5 +0.4 | 93.3 +0.8 | close | + | |
| Focal 10K 6411 | 28.3 +1 | 0.291 -0.03 | 124.1 -18.9 | 8 +0.9 | 93.6 +1.1 | close | + | |
| Visaton W250S-8 | 31 +3.7 | 0.323 +0.01 | 121 -22 | 6.5 -0.6 | 92.5 = | close | Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
| Visaton W250S v2 | 31 +3.7 | 0.323 +0.01 | 121 -22 | 6.5 -0.6 | 92.5 = | close | Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
| Visaton W250S8 | 31 +3.7 | 0.323 +0.01 | 121 -22 | 6.5 -0.6 | 92.5 = | close | Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
| Visaton W250S8 v2 | 31 +3.7 | 0.323 +0.01 | 121 -22 | 6.5 -0.6 | 92.5 = | close | Xmax 6.5 mm < 7.1 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the CA26RE4X vp1 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.