SEAS 25F-WBX
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32 Hz |
| Qts | 0.597 |
| Qes | 0.745 |
| Qms | 3.006 |
| Vas | 114.5 L |
| Sd | 340 cm² |
| Xmax | 6 mm |
| Re | 6.47 Ω |
| Bl | 7.8 T·m |
| Mms | 35 g |
| Pe | 60 W |
| Sensitivity | 89.9 dB |
Alignment hint
| EBP | 43 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 284.2 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SEAS 25F-WBC vp1 Gils | 35.1 +3.1 | 0.58 -0.02 | 129.6 +15.1 | 6 = | 90.1 +0.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Cube F10 SELECT | 30 -2 | 0.567 -0.03 | 121 +6.5 | 4.6 -1.4 | 90.2 +0.3 | close | 25 W vs 60 W: lower power handling · Xmax 4.6 mm < 6 mm: lower excursion-limited SPL | + |
| Peerless SLS10 P830668 v2009 | 33 +1 | 0.591 -0.01 | 75.7 -38.8 | 5.8 -0.2 | 89.7 -0.2 | close | Xmax 5.8 mm < 6 mm: lower excursion-limited SPL | + |
| Beyma 10BR60 V2 | 31 -1 | 0.471 -0.13 | 108.2 -6.3 | 6.5 +0.5 | 90.6 +0.7 | close | + | |
| Monacor SP-254TC | 30 -2 | 0.505 -0.09 | 109 -5.5 | 5 -1 | 90 +0.1 | usable | Xmax 5 mm < 6 mm: lower excursion-limited SPL | + |
| Europsonic HP25/100 vp | 36.6 +4.6 | 0.552 -0.04 | 124.4 +9.9 | 5.5 -0.5 | 91.6 +1.7 | usable | Xmax 5.5 mm < 6 mm: lower excursion-limited SPL | + |
| Beyma 10BR60 V2 vp JF bleu | 32 = | 0.459 -0.14 | 99.9 -14.6 | 6.5 +0.5 | 90 +0.1 | usable | + | |
| Beyma 10BR60 V2 vp JF rouge | 30.7 -1.3 | 0.435 -0.16 | 113.7 -0.8 | 6.5 +0.5 | 90.2 +0.3 | usable | + | |
| Visaton GF 250 - 2x4 Ohms série | 26 -6 | 0.554 -0.04 | 110 -4.5 | 10 +4 | 91 +1.1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Morel MW 1075 | 29 -3 | 0.622 +0.03 | 123 +8.5 | 4.3 -1.7 | 88.6 -1.3 | usable | Xmax 4.3 mm < 6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 25F-WBX →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.