Scan-Speak 26W8867T00
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 19 Hz |
| Qts | 0.29 |
| Qes | 0.31 |
| Qms | 4.5 |
| Vas | 176 L |
| Sd | 320 cm² |
| Xmax | 9 mm |
| Re | 5.8 Ω |
| Bl | 11.3 T·m |
| Mms | 57.2 g |
| Pe | 170 W |
| Sensitivity | 89.3 dB |
Alignment hint
| EBP | 61 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 35.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Scan-Speak 26W/8867T00 | 19 = | 0.29 = | 179 +3 | 9 = | 89.4 +0.1 | close | + | |
| Scan-Speak 26W/8861T00 | 19 = | 0.31 +0.02 | 234 +58 | 9 = | 90 +0.7 | close | 80 W vs 170 W: lower power handling | + |
| Accuton AS250-8-552 | 20 +1 | 0.327 +0.04 | 159 -17 | 9 = | 87.6 -1.7 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Aurum Cantus AC250F1 | 20 +1 | 0.287 = | 224 +48 | 8 -1 | 90 +0.7 | close | Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| Scan-Speak 26W/4867T00 | 18 -1 | 0.294 = | 223 +47 | 9 = | 91.6 +2.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| SEAS L26RFX/P | 20 +1 | 0.33 +0.04 | 171 -5 | 7 -2 | 88.5 -0.8 | usable | 125 W vs 170 W: lower power handling · Xmax 7 mm < 9 mm: lower excursion-limited SPL | + |
| Scan-Speak 28W/4878T00 | 18 -1 | 0.303 +0.01 | 127 -49 | 12.3 +3.3 | 89.7 +0.4 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Purifi Audio PTT10.0X04-NAB-01 | 20 +1 | 0.292 = | 113 -63 | 10.8 +1.8 | 89 -0.3 | usable | + | |
| Accuton AS250-4-552-vp | 20 +1 | 0.247 -0.04 | 162.4 -13.6 | 9 = | 92.6 +3.3 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Visaton WSP26S | 19 = | 0.34 +0.05 | 230 +54 | 11 +2 | 90.2 +0.9 | usable | 110 W vs 170 W: lower power handling | + |
Compare the closest 3 against the 26W8867T00 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.