Scan-Speak 26W/8867T00 vp
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 21.9 Hz |
| Qts | 0.449 |
| Qes | 0.49 |
| Qms | 5.4 |
| Vas | 128 L |
| Sd | 320 cm² |
| Xmax | 9 mm |
| Re | 5.8 Ω |
| Bl | 9.8 T·m |
| Mms | 59.2 g |
| Pe | 170 W |
| Sensitivity | 87.8 dB |
Alignment hint
| EBP | 45 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 86.5 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Kartesian SUB265_VKI-S | 22 +0.1 | 0.443 -0.01 | 108.4 -19.6 | 16 +7 | 89.6 +1.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Audiotechnology 10A7725KAP | 23 +1.1 | 0.41 -0.04 | 139 +11 | 8.6 -0.4 | 89.5 +1.7 | close | Xmax 8.6 mm < 9 mm: lower excursion-limited SPL | + |
| Audiotechnology 10B772510KAP | 25 +3.1 | 0.415 -0.03 | 128 = | 8.6 -0.4 | 89.7 +1.9 | close | Xmax 8.6 mm < 9 mm: lower excursion-limited SPL | + |
| Accuton AS250-8-552 v2018 | 22 +0.1 | 0.353 -0.1 | 119 -9 | 9 = | 87.6 -0.2 | close | + | |
| Peerless XXLS-830843 | 25 +3.1 | 0.447 = | 86.7 -41.3 | 10.3 +1.3 | 88 +0.2 | usable | + | |
| Peerless 831727 | 22.3 +0.4 | 0.332 -0.12 | 136.2 +8.2 | 9 = | 89.7 +1.9 | usable | 110 W vs 170 W: lower power handling | + |
| Image Dynamics CTX128 | 23.3 +1.4 | 0.562 +0.11 | 131.01 +3.01 | 16 +7 | 85.8 -2 | usable | + | |
| Peerless CSX 257 H | 22.6 +0.7 | 0.346 -0.1 | 144.4 +16.4 | 9 = | 89.8 +2 | usable | + | |
| SB Acoustics SB29NRX75-6 | 21 -0.9 | 0.356 -0.09 | 102 -26 | 11 +2 | 88.7 +0.9 | usable | + | |
| Dayton Audio RS270-8 | 24.9 +3 | 0.401 -0.05 | 120.5 -7.5 | 6 -3 | 88.2 +0.4 | usable | 100 W vs 170 W: lower power handling · Xmax 6 mm < 9 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 26W/8867T00 vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.