Scan-Speak 26W/8534G00 v2011
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 23 Hz |
| Qts | 0.402 |
| Qes | 0.42 |
| Qms | 9.12 |
| Vas | 150 L |
| Sd | 350 cm² |
| Xmax | 6 mm |
| Re | 5.7 Ω |
| Bl | 10.4 T·m |
| Mms | 54.8 g |
| Pe | 80 W |
| Sensitivity | 89.8 dB |
Alignment hint
| EBP | 55 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 71.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Audiotechnology 10A7725KAP | 23 = | 0.41 +0.01 | 139 -11 | 8.6 +2.6 | 89.5 -0.3 | close | + | |
| Dayton Audio RS270S-8 | 26.9 +3.9 | 0.41 +0.01 | 147.2 -2.8 | 6 = | 90 +0.2 | close | + | |
| Scan-Speak 25W/8567-SE | 22 -1 | 0.367 -0.04 | 159 +9 | 7.5 +1.5 | 89.4 -0.4 | close | + | |
| Peerless 850146 | 22.6 -0.4 | 0.346 -0.06 | 144.4 -5.6 | 7.5 +1.5 | 89.8 = | close | + | |
| Scan-Speak 26W/8534G00 | 25 +2 | 0.368 -0.03 | 153 +3 | 6 = | 91.5 +1.7 | close | + | |
| Focal 10V 516J | 22.3 -0.7 | 0.39 -0.01 | 180 +30 | 7.5 +1.5 | 90.7 +0.9 | close | + | |
| Peerless CSX 257 H | 22.6 -0.4 | 0.346 -0.06 | 144.4 -5.6 | 9 +3 | 89.8 = | close | + | |
| Scan-Speak 26W/4534G00 | 23 = | 0.356 -0.05 | 156 +6 | 6 = | 92.3 +2.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| KEF B139 SP1044 | 25 +2 | 0.373 -0.03 | 164 +14 | 6 = | 90.9 +1.1 | close | 50 W vs 80 W: lower power handling | + |
| Audiotechnology 10B772510KAP | 25 +2 | 0.415 +0.01 | 128 -22 | 8.6 +2.6 | 89.7 -0.1 | close | + |
Compare the closest 3 against the 26W/8534G00 v2011 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.