Scan-Speak 26W/8534G00
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 25 Hz |
| Qts | 0.368 |
| Qes | 0.38 |
| Qms | 11.4 |
| Vas | 153 L |
| Sd | 353 cm² |
| Xmax | 6 mm |
| Re | 5.6 Ω |
| Bl | 10.3 T·m |
| Mms | 46.3 g |
| Pe | 80 W |
| Sensitivity | 91.5 dB |
Alignment hint
| EBP | 66 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 56.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| KEF B139 SP1044 | 25 = | 0.373 +0.01 | 164 +11 | 6 = | 90.9 -0.6 | close | 50 W vs 80 W: lower power handling | + |
| Scan-Speak 26W/4534G00 | 23 -2 | 0.356 -0.01 | 156 +3 | 6 = | 92.3 +0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Falcon Acoustics B139 SP1044 REMPLACEMENT | 25 = | 0.366 = | 127 -26 | 6 = | 89.5 -2 | close | + | |
| Scan-Speak 26W/8534G00 v2011 | 23 -2 | 0.402 +0.03 | 150 -3 | 6 = | 89.8 -1.7 | close | + | |
| Scan-Speak 25W/8567-SE | 22 -3 | 0.367 = | 159 +6 | 7.5 +1.5 | 89.4 -2.1 | close | + | |
| Beyma 10BR60 V2 v2023 | 29 +4 | 0.388 +0.02 | 142 -11 | 6.5 +0.5 | 91.8 +0.3 | close | + | |
| Dayton Audio RS270S-8 | 26.9 +1.9 | 0.41 +0.04 | 147.2 -5.8 | 6 = | 90 -1.5 | close | + | |
| Focal 10K 516 | 27.8 +2.8 | 0.348 -0.02 | 157 +4 | 7.5 +1.5 | 93.3 +1.8 | close | + | |
| Beyma 10"BR60 V2 | 29 +4 | 0.39 +0.02 | 142 -11 | 6.5 +0.5 | 92 +0.5 | close | + | |
| Dayton Audio SD270-88 v2009 | 25 = | 0.379 +0.01 | 110.4 -42.6 | 6 = | 92.1 +0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 26W/8534G00 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.