SB Audience ROSSO-18SW1000D
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.467 |
| Qes | 0.49 |
| Qms | 10.13 |
| Vas | 164.3 L |
| Sd | 1256.6 cm² |
| Xmax | 8.2 mm |
| Re | 5.3 Ω |
| Bl | 25.7 T·m |
| Mms | 278.6 g |
| Pe | 1000 W |
| Sensitivity | 95.3 dB |
Alignment hint
| EBP | 71 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 127.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce SAF184.04 | 37 +2 | 0.474 +0.01 | 143 -21.3 | 9.3 +1.1 | 95.2 -0.1 | close | + | |
| Faital PRO 18HP1030 v2018 | 35 = | 0.415 -0.05 | 162.1 -2.2 | 9.5 +1.3 | 96.1 +0.8 | close | + | |
| LaVoce SAN184.03 | 36 +1 | 0.417 -0.05 | 160 -4.3 | 9.4 +1.2 | 95.9 +0.6 | close | + | |
| SB Audience NERO-18SW1900D | 34 -1 | 0.419 -0.05 | 158 -6.3 | 10.8 +2.6 | 95.4 +0.1 | close | + | |
| DAS Audio 18SX | 39.2 +4.2 | 0.443 -0.02 | 171.9 +7.6 | 8 -0.2 | 96.4 +1.1 | close | Xmax 8 mm < 8.2 mm: lower excursion-limited SPL | + |
| Sica 18 PF 4 | 38 +3 | 0.43 -0.04 | 147.3 -17 | 8 -0.2 | 96.3 +1 | close | Xmax 8 mm < 8.2 mm: lower excursion-limited SPL | + |
| PD PD 186/2 | 34.2 -0.8 | 0.523 +0.06 | 192.2 +27.9 | 8.7 +0.5 | 94.5 -0.8 | close | 700 W vs 1000 W: lower power handling | + |
| Precision Devices PD 186/2 | 34.2 -0.8 | 0.523 +0.06 | 192.2 +27.9 | 8.7 +0.5 | 94.5 -0.8 | close | 700 W vs 1000 W: lower power handling | + |
| B&C 18TBW100 | 35 = | 0.39 -0.08 | 175 +10.7 | 12 +3.8 | 96 +0.7 | close | + | |
| LaVoce SAF184.02 | 38 +3 | 0.422 -0.05 | 150 -14.3 | 8.1 -0.1 | 96.9 +1.6 | close | Xmax 8.1 mm < 8.2 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the ROSSO-18SW1000D →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.