SB Audience BIANCO-18SW500
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.516 |
| Qes | 0.53 |
| Qms | 19.04 |
| Vas | 335 L |
| Sd | 1269 cm² |
| Xmax | 9.2 mm |
| Re | 5.7 Ω |
| Bl | 19.6 T·m |
| Mms | 189.7 g |
| Pe | 500 W |
| Sensitivity | 95.8 dB |
Alignment hint
| EBP | 57 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 381.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KILOMAX PRO-18A | 32 +2 | 0.47 -0.05 | 331.5 -3.5 | 10 +0.8 | 95.8 = | close | + | |
| Beyma 18WRS600 | 30 = | 0.47 -0.05 | 354 +19 | 8.5 -0.7 | 97 +1.2 | close | Xmax 8.5 mm < 9.2 mm: lower excursion-limited SPL | + |
| Eminence KILOMAX PRO 18 A v2016 | 32 +2 | 0.467 -0.05 | 331.5 -3.5 | 10 +0.8 | 97.4 +1.6 | close | + | |
| Radian 2218-8 | 33.8 +3.8 | 0.518 = | 282.9 -52.1 | 9 -0.2 | 95.5 -0.3 | close | Xmax 9 mm < 9.2 mm: lower excursion-limited SPL | + |
| Radian 2218 | 33.8 +3.8 | 0.525 +0.01 | 286 -49 | 9 -0.2 | 95.5 -0.3 | close | Xmax 9 mm < 9.2 mm: lower excursion-limited SPL | + |
| Beyma 18LX60 vp1 | 31.3 +1.3 | 0.472 -0.04 | 385 +50 | 9 -0.2 | 96.8 +1 | close | Xmax 9 mm < 9.2 mm: lower excursion-limited SPL | + |
| Beyma 18LX60 (prodance) | 31.3 +1.3 | 0.472 -0.04 | 385.3 +50.3 | 9 -0.2 | 96.8 +1 | close | Xmax 9 mm < 9.2 mm: lower excursion-limited SPL | + |
| Eminence KILOMAX 18 | 33.8 +3.8 | 0.527 +0.01 | 281.4 -53.6 | 10 +0.8 | 96.4 +0.6 | close | + | |
| Faital PRO 18FH500 | 30 = | 0.53 +0.01 | 450.1 +115.1 | 9.45 +0.25 | 97 +1.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| McCauley 6152-8 | 30 = | 0.434 -0.08 | 354 +19 | 12 +2.8 | 97.1 +1.3 | close | + |
Compare the closest 3 against the BIANCO-18SW500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.