SB Acoustics SW26DAC76-8

10" · 8 Ω · 200 W · 83.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	20 Hz
Qts	0.288
Qes	0.3
Qms	7
Vas	45.4 L
Sd	312 cm²
Xmax	7.9 mm
Re	6.4 Ω
Bl	22.6 T·m
Mms	190.3 g
Pe	200 W
Sensitivity	83.8 dB

Alignment hint

EBP	67 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 9 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
SB Acoustics SB29SWNRX-75-6	20 =	0.29 =	66 +20.6	9.5 +1.6	86.8 +3	usable		+
Helix P10W PRECISION	25 +5	0.28 -0.01	50 +4.6	6.5 -1.4	85.9 +2.1	usable	4 Ω vs 8 Ω: amp load changes · Xmax 6.5 mm < 7.9 mm: lower excursion-limited SPL	+
SB Acoustics SB29SWNRX-S75-6	20 =	0.315 +0.03	66 +20.6	10 +2.1	86.5 +2.7	usable		+
TC Sounds EPIC 10 DVC	24.3 +4.3	0.316 +0.03	49.5 +4.1	11.9 +4	88.6 +4.8	usable	4 Ω vs 8 Ω: amp load changes	+
SEAS L26RO4Y D1004-04	24 +4	0.265 -0.02	46 +0.6	6.6 -1.3	89.4 +5.6	usable	4 Ω vs 8 Ω: amp load changes · Xmax 6.6 mm < 7.9 mm: lower excursion-limited SPL	+
JL Audio 10W1V2-4	25.2 +5.2	0.405 +0.12	50.4601 +5.06	9.906 +2.01	84.6 +0.8	usable	4 Ω vs 8 Ω: amp load changes	+
SB Acoustics SW26DAC76-4	22 +2	0.467 +0.18	45.3 -0.1	9.6 +1.7	85.8 +2	usable	4 Ω vs 8 Ω: amp load changes	+
Infinity KAPPA PERFECT 10D VQ31	25.1 +5.1	0.301 +0.01	37.7 -7.7	8.4 +0.5	91.7 +7.9	usable	2 Ω vs 8 Ω: amp load changes	+
Wavecor SW263WA01	24 +4	0.44 +0.15	40.5 -4.9	8.7 +0.8	84 +0.2	usable		+
Wavecor SW263WA03	24 +4	0.44 +0.15	40.5 -4.9	8.7 +0.8	84 +0.2	usable		+

Compare the closest 3 against the SW26DAC76-8 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.