← all drivers

SB Acoustics SW26DAC76-4

10" · 4 Ω · 200 W · 85.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs22 Hz
Qts0.467
Qes0.5
Qms7
Vas45.3 L
Sd312 cm²
Xmax9.6 mm
Re3.2 Ω
Bl11.8 T·m
Mms157.7 g
Pe200 W
Sensitivity85.8 dB

Alignment hint

EBP44 · sealed
Sealed Vb (Qtc ≈ 0.71)≈ 35 L

EBP < 50: favours a sealed (closed) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Focal SUB1021 -10.526 +0.0645 -0.39 -0.684.5 -1.3closeXmax 9 mm < 9.6 mm: lower excursion-limited SPL+
JL Audio 10W1V3-225.23 +3.230.436 -0.0344.15 -1.1511 +1.483.9 -1.9close2 Ω vs 4 Ω: amp load changes+
Dayton Audio RSS265HF-4 v201226.2 +4.20.441 -0.0345 -0.39.4 -0.287.8 +2closeXmax 9.4 mm < 9.6 mm: lower excursion-limited SPL+
JL Audio 10W1V3-426.15 +4.150.446 -0.0243.41 -1.8911 +1.484.2 -1.6close+
Dayton Audio RSS265HF-8 v201824.9 +2.90.485 +0.0252.5 +7.29.4 -0.284.3 -1.5close8 Ω vs 4 Ω: amp load changes · Xmax 9.4 mm < 9.6 mm: lower excursion-limited SPL+
JL Audio 10WXV2-429.38 +7.380.45 -0.0247 +1.710 +0.486.06 +0.26close+
JL Audio 10W1V2-826.5 +4.50.438 -0.0349.1009 +3.89.906 +0.3184.7 -1.1close8 Ω vs 4 Ω: amp load changes+
Dayton Audio RSS265HF-824.9 +2.90.497 +0.0351.6 +6.39.4 -0.284.3 -1.5close8 Ω vs 4 Ω: amp load changes · Xmax 9.4 mm < 9.6 mm: lower excursion-limited SPL+
Wavecor SW263WA0124 +20.44 -0.0340.5 -4.88.7 -0.984 -1.8close8 Ω vs 4 Ω: amp load changes · Xmax 8.7 mm < 9.6 mm: lower excursion-limited SPL+
Wavecor SW263WA0324 +20.44 -0.0340.5 -4.88.7 -0.984 -1.8close8 Ω vs 4 Ω: amp load changes · Xmax 8.7 mm < 9.6 mm: lower excursion-limited SPL+

Compare the closest 3 against the SW26DAC76-4 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.