SB Acoustics SB34SWPL76-4 v2019
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 19 Hz |
| Qts | 0.327 |
| Qes | 0.34 |
| Qms | 8.6 |
| Vas | 78.5 L |
| Sd | 458 cm² |
| Xmax | 9.7 mm |
| Re | 3.5 Ω |
| Bl | 18 T·m |
| Mms | 262.8 g |
| Pe | 300 W |
| Sensitivity | 87.6 dB |
Alignment hint
| EBP | 56 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 21.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oxygen AIR2 300 vp | 22 +3 | 0.34 +0.01 | 82 +3.5 | 9.6 -0.1 | 89.4 +1.8 | close | Xmax 9.6 mm < 9.7 mm: lower excursion-limited SPL | + |
| SB Acoustics SB34SWPL76-4 | 18 -1 | 0.319 -0.01 | 89.5 +11 | 7.5 -2.2 | 87.6 = | close | Xmax 7.5 mm < 9.7 mm: lower excursion-limited SPL | + |
| Oxygen AIR2 300 v2015 | 22.7 +3.7 | 0.388 +0.06 | 78 -0.5 | 9.9 +0.2 | 89.1 +1.5 | usable | + | |
| CSS Audio SDX12 DVC | 21.3 +2.3 | 0.375 +0.05 | 67.5 -11 | 13.4 +3.7 | 87.3 -0.3 | usable | + | |
| RE Audio XXX12-V2-4 | 21 +2 | 0.404 +0.08 | 73.9 -4.6 | 13.5 +3.8 | 86.5 -1.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Ground Zero GZHW 30X | 22.6 +3.6 | 0.32 -0.01 | 101 +22.5 | 12.3 +2.6 | 90.6 +3 | usable | + | |
| Kenwood XR-W1204 | 21.5 +2.5 | 0.341 +0.01 | 125.386 +46.89 | 10.8 +1.1 | 87.3 -0.3 | usable | + | |
| Eclipse 8712.8 | 20 +1 | 0.39 +0.06 | 84.95 +6.45 | 18.5 +8.8 | 84.1 -3.5 | usable | 8 Ω vs 4 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
| Helix W-12 COMPETITION | 21.4 +2.4 | 0.3 -0.03 | 118.6 +40.1 | 11 +1.3 | 87.3 -0.3 | usable | + | |
| Infinity REFERENCE 1260W | 23.5 +4.5 | 0.39 +0.06 | 83 +4.5 | 13 +3.3 | 86 -1.6 | usable | + |
Compare the closest 3 against the SB34SWPL76-4 v2019 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.