← all drivers

SB Acoustics SB26SFCL38-4

10" · 4 Ω · 80 W · 92.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs27.4 Hz
Qts0.434
Qes0.47
Qms5.59
Vas104 L
Sd346 cm²
Xmax7.2 mm
Re3.3 Ω
Bl8.1 T·m
Mms54.4 g
Pe80 W
Sensitivity92.4 dB

Alignment hint

EBP58 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 62.9 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Dayton Audio SD270A-88 DVC26.2 -1.20.433 =107.5 +3.56 -1.291.9 -0.5closeXmax 6 mm < 7.2 mm: lower excursion-limited SPL+
JBL LE10A30 +2.60.41 -0.02101.9 -2.16.1 -1.192.5 +0.1close8 Ω vs 4 Ω: amp load changes · 60 W vs 80 W: lower power handling · Xmax 6.1 mm < 7.2 mm: lower excursion-limited SPL+
Dayton Audio DA270-8 1027.8 +0.40.429 -0.01108.5 +4.56.1 -1.189.3 -3.1close8 Ω vs 4 Ω: amp load changes · Xmax 6.1 mm < 7.2 mm: lower excursion-limited SPL+
Dayton Audio SD270-8829.6 +2.20.44 +0.01112.2 +8.26 -1.293.7 +1.3closeXmax 6 mm < 7.2 mm: lower excursion-limited SPL+
Beyma 10BR60 V2 vp JF rouge30.7 +3.30.435 =113.7 +9.76.5 -0.790.2 -2.2close8 Ω vs 4 Ω: amp load changes · Xmax 6.5 mm < 7.2 mm: lower excursion-limited SPL+
Dayton Audio DA270-827.8 +0.40.43 =108.5 +4.56.1 -1.188.1 -4.3close8 Ω vs 4 Ω: amp load changes · Xmax 6.1 mm < 7.2 mm: lower excursion-limited SPL+
Sony XS-L100C28.1 +0.70.362 -0.07104 =6.3 -0.993.4 +1closeXmax 6.3 mm < 7.2 mm: lower excursion-limited SPL+
SICA Z00578031.7 +4.30.455 +0.0292.6 -11.48.9 +1.793.5 +1.1close+
Beyma 10BR60 V231 +3.60.471 +0.04108.2 +4.26.5 -0.790.6 -1.8close8 Ω vs 4 Ω: amp load changes · Xmax 6.5 mm < 7.2 mm: lower excursion-limited SPL+
Dayton Audio SD270-88 v200925 -2.40.379 -0.05110.4 +6.46 -1.292.1 -0.3usableXmax 6 mm < 7.2 mm: lower excursion-limited SPL+

Compare the closest 3 against the SB26SFCL38-4 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.