RCF W470
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 36 Hz |
| Qts | 0.35 |
| Qes | 0.36 |
| Qms | 12.6 |
| Vas | 201 L |
| Sd | 1134.1 cm² |
| Xmax | 6 mm |
| Re | 3.5 Ω |
| Bl | 19.6 T·m |
| Mms | 175.3 g |
| Pe | 800 W |
| Sensitivity | 99.7 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 65.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fane Colossus 18SB | 36 = | 0.346 = | 199 -2 | 8.25 +2.25 | 100 +0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18P1200Nd | 37 +1 | 0.339 -0.01 | 198 -3 | 8.4 +2.4 | 98.3 -1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PDN 18SB40 | 38.5 +2.5 | 0.326 -0.02 | 201.3 +0.3 | 6 = | 98.6 -1.1 | close | 8 Ω vs 4 Ω: amp load changes · 600 W vs 800 W: lower power handling | + |
| Precision Devices PDN 18SB40 | 38.5 +2.5 | 0.326 -0.02 | 201.3 +0.3 | 6 = | 98.6 -1.1 | close | 8 Ω vs 4 Ω: amp load changes · 600 W vs 800 W: lower power handling | + |
| Sica 18 K 4 PL | 36.8 +0.8 | 0.32 -0.03 | 201 = | 6.5 +0.5 | 97.8 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18G50 vp | 39 +3 | 0.365 +0.02 | 204.9 +3.9 | 6.4 +0.4 | 98.1 -1.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18 RBX 100 | 35 -1 | 0.343 -0.01 | 220 +19 | 8.3 +2.3 | 98.1 -1.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18G550 | 36 = | 0.374 +0.02 | 210 +9 | 8.1 +2.1 | 97.8 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18G550 v2015 | 36 = | 0.374 +0.02 | 210 +9 | 8.1 +2.1 | 97.8 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18PZW100 | 37 +1 | 0.36 +0.01 | 186 -15 | 8 +2 | 97.6 -2.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the W470 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.