RCF MB 15X301 (prodance)
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50.6 Hz |
| Qts | 0.44 |
| Qes | 0.48 |
| Qms | 5.26 |
| Vas | 133.8 L |
| Sd | 881 cm² |
| Xmax | 5.9 mm |
| Re | 5.5 Ω |
| Bl | 17.1 T·m |
| Mms | 80.5 g |
| Pe | 500 W |
| Sensitivity | 99.2 dB |
Alignment hint
| EBP | 105 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 84.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2226HPL vp prodance | 49 -1.6 | 0.396 -0.04 | 140.1 +6.3 | 5.8 -0.1 | 99.2 = | close | Xmax 5.8 mm < 5.9 mm: lower excursion-limited SPL | + |
| Beyma 15MC500 | 46 -4.6 | 0.45 +0.01 | 134 +0.2 | 8 +2.1 | 98 -1.2 | close | + | |
| Eminence KAPPALITE 3015 LF-4 | 47 -3.6 | 0.468 +0.03 | 118.6 -15.2 | 5.7 -0.2 | 99.2 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 5.7 mm < 5.9 mm: lower excursion-limited SPL | + |
| Beyma 15MCS500-8 | 46 -4.6 | 0.47 +0.03 | 133.5 -0.3 | 6.5 +0.6 | 97.5 -1.7 | close | + | |
| PD PD 156 | 50.2 -0.4 | 0.378 -0.06 | 120.2 -13.6 | 6.6 +0.7 | 99.2 = | close | + | |
| Precision Devices PD 156 | 50.2 -0.4 | 0.378 -0.06 | 120.2 -13.6 | 6.6 +0.7 | 99.2 = | close | + | |
| MCM Electronics 55-3243 | 43.6 -7 | 0.465 +0.03 | 127.5 -6.3 | 6.2 +0.3 | 98.5 -0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 15MCS500 | 46 -4.6 | 0.48 +0.04 | 134 +0.2 | 8 +2.1 | 98 -1.2 | close | + | |
| SICA P-A-PL15B3S | 46.5 -4.1 | 0.479 +0.04 | 139.8 +6 | 5.5 -0.4 | 98.3 -0.9 | close | 350 W vs 500 W: lower power handling · Xmax 5.5 mm < 5.9 mm: lower excursion-limited SPL | + |
| Eminence 15-3008PS LF | 46.6 -4 | 0.396 -0.04 | 130 -3.8 | 5.5 -0.4 | 98.4 -0.8 | close | Xmax 5.5 mm < 5.9 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the MB 15X301 (prodance) →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.