RCF MB 12N301
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 54 Hz |
| Qts | 0.24 |
| Qes | 0.26 |
| Qms | 3.1 |
| Vas | 71 L |
| Sd | 530 cm² |
| Xmax | 4.9 mm |
| Re | 5.8 Ω |
| Bl | 19.1 T·m |
| Mms | 48.2 g |
| Pe | 500 W |
| Sensitivity | 99.7 dB |
Alignment hint
| EBP | 208 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 12CX800 | 53 -1 | 0.253 +0.01 | 73 +2 | 4.7 -0.2 | 99.4 -0.3 | close | Xmax 4.7 mm < 4.9 mm: lower excursion-limited SPL | + |
| RCF MB 12G301 | 53 -1 | 0.264 +0.02 | 72 +1 | 4.8 -0.1 | 99.5 -0.2 | close | Xmax 4.8 mm < 4.9 mm: lower excursion-limited SPL | + |
| B&C 12PLB76 | 50 -4 | 0.23 -0.01 | 75 +4 | 5 +0.1 | 99 -0.7 | close | 350 W vs 500 W: lower power handling | + |
| Electro-Voice EVM-DL12X | 56 +2 | 0.24 = | 77.3 +6.3 | 4.1 -0.8 | 99.2 -0.5 | close | 150 W vs 500 W: lower power handling · Xmax 4.1 mm < 4.9 mm: lower excursion-limited SPL | + |
| B&C 12 PLB 76 | 50 -4 | 0.229 -0.01 | 75 +4 | 4.4 -0.5 | 99.7 = | close | 350 W vs 500 W: lower power handling · Xmax 4.4 mm < 4.9 mm: lower excursion-limited SPL | + |
| Oberton 12B400 | 50.47 -3.53 | 0.249 +0.01 | 74.74 +3.74 | 5.25 +0.35 | 98 -1.7 | close | + | |
| 18 Sound 12ND830 | 58 +4 | 0.24 = | 63 -8 | 6.5 +1.6 | 99 -0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Oberton 12B450 | 46.29 -7.71 | 0.235 -0.01 | 71.75 +0.75 | 7.75 +2.85 | 99 -0.7 | close | + | |
| 18 Sound 12ND830 | 55 +1 | 0.28 +0.04 | 72 +1 | 6.5 +1.6 | 99 -0.7 | close | + | |
| Electro-Voice DL12X | 56 +2 | 0.233 -0.01 | 77 +6 | 4.1 -0.8 | 100.7 +1 | close | 300 W vs 500 W: lower power handling · Xmax 4.1 mm < 4.9 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the MB 12N301 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.