RCF LF18N408
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.33 |
| Qes | 0.36 |
| Qms | 3.6 |
| Vas | 193 L |
| Sd | 1220 cm² |
| Xmax | 15 mm |
| Re | 4.3 Ω |
| Bl | 25.7 T·m |
| Mms | 284 g |
| Pe | 1500 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 53.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 18NLW4100 | 31 +1 | 0.34 +0.01 | 180 -13 | 15 = | 96.5 -0.5 | close | + | |
| Faital PRO 18HW1070 | 32 +2 | 0.33 = | 191.5 -1.5 | 13 -2 | 96 -1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 13 mm < 15 mm: lower excursion-limited SPL | + |
| RCF LF18N405 | 30 = | 0.32 -0.01 | 227 +34 | 14 -1 | 97 = | close | Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
| 18 Sound 18LW2600 | 31 +1 | 0.29 -0.04 | 187 -6 | 14.8 -0.2 | 96.8 -0.2 | close | Xmax 14.8 mm < 15 mm: lower excursion-limited SPL | + |
| B&C 18SW115 | 32 +2 | 0.3 -0.03 | 187 -6 | 14 -1 | 97 = | close | Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
| 18 Sound 18NTLW5000 | 32 +2 | 0.32 -0.01 | 176 -17 | 17.5 +2.5 | 95 -2 | close | + | |
| 18 Sound 18LW2600 | 30 = | 0.28 -0.05 | 186 -7 | 14 -1 | 96.5 -0.5 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
| 18 Sound 18NLW9000 | 34 +4 | 0.31 -0.02 | 206 +13 | 14 -1 | 97 = | close | Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
| RCF LF 18N408 | 30 = | 0.327 = | 193 = | 9.8 -5.2 | 96.3 -0.7 | close | Xmax 9.8 mm < 15 mm: lower excursion-limited SPL | + |
| Faital PRO 18XL1600 | 32 +2 | 0.31 -0.02 | 201.1 +8.1 | 12.92 -2.08 | 98 +1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 12.92 mm < 15 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the LF18N408 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.