RCF L18P300
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.33 |
| Qes | 0.34 |
| Qms | 8.3 |
| Vas | 226 L |
| Sd | 1130 cm² |
| Xmax | 7.8 mm |
| Re | 5.03 Ω |
| Bl | 23.5 T·m |
| Mms | 180 g |
| Pe | 500 W |
| Sensitivity | 95.6 dB |
Alignment hint
| EBP | 97 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 62.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF L 18P300 8 Ohms | 33 = | 0.327 = | 226 = | 7.8 = | 97.8 +2.2 | close | + | |
| BMS 18S430 | 32.9 -0.1 | 0.33 = | 247 +21 | 7.5 -0.3 | 96 +0.4 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18XB v2016 | 33 = | 0.337 +0.01 | 236 +10 | 7.5 -0.3 | 96.6 +1 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| Fane 18XBN | 33 = | 0.337 +0.01 | 236 +10 | 7.5 -0.3 | 96.8 +1.2 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18XBN | 33 = | 0.337 +0.01 | 236 +10 | 7.5 -0.3 | 96.8 +1.2 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| Beyma 18P1000FE | 33 = | 0.32 -0.01 | 230 +4 | 8 +0.2 | 97.8 +2.2 | close | + | |
| Beyma 18" P1000Fe V2/S | 33 = | 0.32 -0.01 | 230 +4 | 8 +0.2 | 98 +2.4 | close | + | |
| 18 Sound 18LW1400 | 33 = | 0.32 -0.01 | 210 -16 | 9 +1.2 | 97 +1.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Eminence DEFINIMAX 4018 LF | 32 -1 | 0.348 +0.02 | 237.9 +11.9 | 8.6 +0.8 | 96.4 +0.8 | close | + | |
| Beyma 18SW1600ND | 32 -1 | 0.33 = | 205.7 -20.3 | 10 +2.2 | 96.6 +1 | close | + |
Compare the closest 3 against the L18P300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.