RCF L10CX1AK

10" · 8 Ω · 60 W · 93.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	67.9 Hz
Qts	0.59
Qes	0.69
Qms	4
Vas	33 L
Sd	314 cm²
Xmax	3 mm
Re	5.08 Ω
Bl	8.5 T·m
Mms	23 g
Pe	60 W
Sensitivity	93.6 dB

Alignment hint

EBP	98 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 75.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Celestion BL 10-100	70 +2.1	0.608 +0.02	33 =	3.3 +0.3	95.7 +2.1	close		+
LaVoce FBASS10-18-16	70 +2.1	0.57 -0.02	28.39 -4.61	4.8 +1.8	95 +1.4	close	16 Ω vs 8 Ω: amp load changes	+
Fenton NS10X	67.5 -0.4	0.563 -0.03	40.2 +7.2	3.8 +0.8	95.6 +2	close		+
Fenton PS10F vp	60.1 -7.8	0.586 =	41.2 +8.2	4 +1	93.3 -0.3	close	16 Ω vs 8 Ω: amp load changes	+
Peerless FSL-1015R02-08	68.4 +0.5	0.616 +0.03	37.7 +4.7	2.2 -0.8	95.9 +2.3	usable	Xmax 2.2 mm < 3 mm: lower excursion-limited SPL	+
Celestion BL10-100X	74.4 +6.5	0.532 -0.06	25.1 -7.9	3.5 +0.5	93.8 +0.2	usable		+
Focal 270 V3	51.1 -16.8	0.663 +0.07	33.3 +0.3	4.5 +1.5	93.9 +0.3	usable	4 Ω vs 8 Ω: amp load changes	+
Fenton PS10 vp	57.6 -10.3	0.657 +0.07	37.9 +4.9	3.8 +0.8	92.1 -1.5	usable		+
Focal 11V 5442	51.1 -16.8	0.663 +0.07	33.3 +0.3	4.9 +1.9	93.9 +0.3	usable	4 Ω vs 8 Ω: amp load changes	+
Focal 270 V	51.1 -16.8	0.663 +0.07	33.3 +0.3	5.5 +2.5	93.9 +0.3	usable	4 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the L10CX1AK →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.