RCF L 18P300 4 Ohms
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 34 Hz |
| Qts | 0.305 |
| Qes | 0.32 |
| Qms | 6.7 |
| Vas | 213 L |
| Sd | 1130 cm² |
| Xmax | 7.8 mm |
| Re | 3.4 Ω |
| Bl | 20.4 T·m |
| Mms | 184.1 g |
| Pe | 1000 W |
| Sensitivity | 99.9 dB |
Alignment hint
| EBP | 106 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 48.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 18 TBX 46 v2 | 34 = | 0.311 +0.01 | 227 +14 | 8.1 +0.3 | 98.2 -1.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 18LW2420 | 34 = | 0.31 +0.01 | 208 -5 | 10 +2.2 | 98 -1.9 | close | + | |
| PD PD 185N002 | 36 +2 | 0.297 -0.01 | 226 +13 | 7.8 = | 98.7 -1.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD 185N002 | 36 +2 | 0.297 -0.01 | 226 +13 | 7.8 = | 98.7 -1.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 18HP1022 | 35 +1 | 0.3 -0.01 | 204.9 -8.1 | 9.5 +1.7 | 98 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Monacor SP-18/1000HP | 35 +1 | 0.282 -0.02 | 219 +6 | 7.9 +0.1 | 98.8 -1.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Fane 18-800N | 38 +4 | 0.306 = | 217 +4 | 7.1 -0.7 | 99.5 -0.4 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 7.1 mm < 7.8 mm: lower excursion-limited SPL | + |
| Faital PRO 18HP1010 | 35 +1 | 0.31 +0.01 | 225.9 +12.9 | 9.75 +1.95 | 98 -1.9 | close | + | |
| Faital PRO W18N8-1000 | 35 +1 | 0.273 -0.03 | 211.8 -1.2 | 7.8 = | 98.8 -1.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 18LW2400 | 35 +1 | 0.31 +0.01 | 230 +17 | 9.5 +1.7 | 98 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the L 18P300 4 Ohms →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.