RCF L 18P200KN
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 22.3 Hz |
| Qts | 0.265 |
| Qes | 0.28 |
| Qms | 5 |
| Vas | 550 L |
| Sd | 1041 cm² |
| Xmax | 9 mm |
| Re | 6.3 Ω |
| Bl | 21.1 T·m |
| Mms | 140.7 g |
| Pe | 350 W |
| Sensitivity | 96.4 dB |
Alignment hint
| EBP | 80 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 89.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD184 | 27 +4.7 | 0.253 -0.01 | 473 -77 | 9.5 +0.5 | 97 +0.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Electro-Voice DL18MT | 24 +1.7 | 0.269 = | 580.5 +30.5 | 5.59 -3.41 | 96.6 +0.2 | usable | Xmax 5.59 mm < 9 mm: lower excursion-limited SPL | + |
| Faital PRO 18FH500 | 28 +5.7 | 0.29 +0.02 | 456.7 -93.3 | 9.45 +0.45 | 98 +1.6 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion FTR18-4080HD | 26 +3.7 | 0.272 +0.01 | 395.6 -154.4 | 8 -1 | 97.5 +1.1 | usable | Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| Eminence JAY7010 | 28.1 +5.8 | 0.314 +0.05 | 546.6 -3.4 | 9.1 +0.1 | 99.2 +2.8 | usable | + | |
| Monacor SPH-450TC vp série | 20 -2.3 | 0.248 -0.02 | 480 -70 | 6.5 -2.5 | 93.8 -2.6 | usable | Xmax 6.5 mm < 9 mm: lower excursion-limited SPL | + |
| Eminence DELTA PRO 18 | 26 +3.7 | 0.301 +0.04 | 523 -27 | 6.7 -2.3 | 98.4 +2 | usable | Xmax 6.7 mm < 9 mm: lower excursion-limited SPL | + |
| JBL 2245H | 20 -2.3 | 0.24 -0.03 | 821.2 +271.2 | 8.5 -0.5 | 97.2 +0.8 | usable | Xmax 8.5 mm < 9 mm: lower excursion-limited SPL | + |
| RCF LP 18/551 | 21.7 -0.6 | 0.222 -0.04 | 760 +210 | 10 +1 | 98.8 +2.4 | usable | + | |
| RCF LF18G400 | 28 +5.7 | 0.27 +0.01 | 360 -190 | 9 = | 97.5 +1.1 | usable | + |
Compare the closest 3 against the L 18P200KN →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.