RCF L 15P200AK-II
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.336 |
| Qes | 0.35 |
| Qms | 8.1 |
| Vas | 139 L |
| Sd | 830 cm² |
| Xmax | 8.3 mm |
| Re | 6.5 Ω |
| Bl | 23.2 T·m |
| Mms | 121.9 g |
| Pe | 800 W |
| Sensitivity | 96.3 dB |
Alignment hint
| EBP | 109 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 40.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF L 15P200AK | 38 = | 0.351 +0.01 | 139 = | 8.2 -0.1 | 96.4 +0.1 | close | Xmax 8.2 mm < 8.3 mm: lower excursion-limited SPL | + |
| RCF L 15P200AK-I | 38 = | 0.36 +0.02 | 139 = | 8.5 +0.2 | 96.3 = | close | + | |
| Faital PRO 15FH530 | 39 +1 | 0.35 +0.01 | 140.6 +1.6 | 9.25 +0.95 | 97 +0.7 | close | 500 W vs 800 W: lower power handling | + |
| Faital PRO 15FH520 | 38 = | 0.34 = | 153.2 +14.2 | 9.15 +0.85 | 97 +0.7 | close | 4 Ω vs 8 Ω: amp load changes · 600 W vs 800 W: lower power handling | + |
| B&C 15 PS 100 (prodance) | 34.8 -3.2 | 0.339 = | 148.7 +9.7 | 8 -0.3 | 96.2 -0.1 | close | Xmax 8 mm < 8.3 mm: lower excursion-limited SPL | + |
| Peavey 15 LOW MAX | 38.2 +0.2 | 0.352 +0.02 | 125.6 -13.4 | 9.8 +1.5 | 96 -0.3 | close | + | |
| Peavey LO MAX 15 v2011 | 38.5 +0.5 | 0.352 +0.02 | 124 -15 | 9.2 +0.9 | 96.6 +0.3 | close | + | |
| PD PDN 15BR40-V2 | 39.2 +1.2 | 0.376 +0.04 | 140.1 +1.1 | 8.2 -0.1 | 97.3 +1 | close | Xmax 8.2 mm < 8.3 mm: lower excursion-limited SPL | + |
| Precision Devices PDN 15BR40-V2 | 39.2 +1.2 | 0.376 +0.04 | 140.1 +1.1 | 8.2 -0.1 | 97.3 +1 | close | Xmax 8.2 mm < 8.3 mm: lower excursion-limited SPL | + |
| Sica 15 PNS 4 | 37.3 -0.7 | 0.35 +0.01 | 116.3 -22.7 | 9 +0.7 | 96 -0.3 | close | + |
Compare the closest 3 against the L 15P200AK-II →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.