RCF L 15P200AK

15" · 8 Ω · 800 W · 96.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size	15"
Impedance	8 Ω
Fs	38 Hz
Qts	0.351
Qes	0.37
Qms	6.8
Vas	139 L
Sd	855.3 cm²
Xmax	8.2 mm
Re	5.9 Ω
Bl	22.2 T·m
Mms	129.4 g
Pe	800 W
Sensitivity	96.4 dB

Alignment hint

EBP	103 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 45.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
RCF L 15P200AK-I	38 =	0.36 +0.01	139 =	8.5 +0.3	96.3 -0.1	close		+
RCF L 15P200AK-II	38 =	0.336 -0.01	139 =	8.3 +0.1	96.3 -0.1	close		+
Faital PRO 15FH530	39 +1	0.35 =	140.6 +1.6	9.25 +1.05	97 +0.6	close	500 W vs 800 W: lower power handling	+
Peavey LO MAX 15 v2011	38.5 +0.5	0.352 =	124 -15	9.2 +1	96.6 +0.2	close		+
Peavey 15 LOW MAX	38.2 +0.2	0.352 =	125.6 -13.4	9.8 +1.6	96 -0.4	close		+
Faital PRO 15FH520	38 =	0.34 -0.01	153.2 +14.2	9.15 +0.95	97 +0.6	close	4 Ω vs 8 Ω: amp load changes · 600 W vs 800 W: lower power handling	+
PD PDN 15BR40-V2	39.2 +1.2	0.376 +0.03	140.1 +1.1	8.2 =	97.3 +0.9	close		+
Precision Devices PDN 15BR40-V2	39.2 +1.2	0.376 +0.03	140.1 +1.1	8.2 =	97.3 +0.9	close		+
Sica 15 PNS 4	37.3 -0.7	0.35 =	116.3 -22.7	9 +0.8	96 -0.4	close		+
B&C 15 PS 100 (prodance)	34.8 -3.2	0.339 -0.01	148.7 +9.7	8 -0.2	96.2 -0.2	close	Xmax 8 mm < 8.2 mm: lower excursion-limited SPL	+

Compare the closest 3 against the L 15P200AK →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.