RCF CX12N351
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 58 Hz |
| Qts | 0.2 |
| Qes | 0.21 |
| Qms | 5.4 |
| Vas | 47 L |
| Sd | 530 cm² |
| Xmax | 6 mm |
| Re | 5.8 Ω |
| Bl | 25 T·m |
| Mms | 62 g |
| Pe | 90 W |
| Sensitivity | 98.2 dB |
Alignment hint
| EBP | 276 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12FW76 | 54 -4 | 0.18 -0.02 | 48.5 +1.5 | 7 +1 | 99 +0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| RCF MB 12N405 | 52 -6 | 0.203 = | 53 +6 | 5.7 -0.3 | 99.5 +1.3 | close | Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| Precision Devices PD121 | 59 +1 | 0.201 = | 54 +7 | 5 -1 | 100 +1.8 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 6 mm: lower excursion-limited SPL | + |
| Sica 12 F 4 CP | 46 -12 | 0.2 = | 52 +5 | 6 = | 97.8 -0.4 | close | + | |
| B&C 12FW76 | 54 -4 | 0.18 -0.02 | 45 -2 | 7 +1 | 100 +1.8 | close | + | |
| RCF LF 12N401 | 48 -10 | 0.205 = | 50 +3 | 5.2 -0.8 | 97.8 -0.4 | close | Xmax 5.2 mm < 6 mm: lower excursion-limited SPL | + |
| RCF CX 12N351 V2017 | 58 = | 0.202 = | 47 = | 3.6 -2.4 | 99.8 +1.6 | close | Xmax 3.6 mm < 6 mm: lower excursion-limited SPL | + |
| RCF LF 12X401 | 45 -13 | 0.211 +0.01 | 50 +3 | 6.1 +0.1 | 97 -1.2 | usable | + | |
| Precision Devices PD123 ER | 60.5 +2.5 | 0.247 +0.05 | 51 +4 | 6.5 +0.5 | 97 -1.2 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| RCF MB 12N407 | 48 -10 | 0.194 -0.01 | 50 +3 | 4.7 -1.3 | 98.4 +0.2 | usable | Xmax 4.7 mm < 6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the CX12N351 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.