Radian 760
Compression driver specs
| Throat exit | 2" |
|---|---|
| Voice coil | 76.2 mm |
| Impedance | 16 Ω |
| Usable range | 500-18000 Hz |
| Min crossover | 700 Hz |
| Sensitivity (on horn) | 111 dB |
| Power (AES) | 100 W |
Compatible horns (same exit)
- B&C ME60 · 60°×40°
- Beyma TD-460/N · 60°×40°
- BMS 2230 · 90°×55°
- BMS 2236 · 60°×40°
Matched on throat exit (2") only. Verify mounting and crossover against both datasheets.
Substitute candidates
| Driver | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Radian 760 | 700 = | 500 = | 18000 = | 76.2 = | 111 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| Radian 850 | 700 = | 500 = | 20000 +2000 | 76.2 = | 112 +1 | close | + | |
| Radian 850 | 700 = | 500 = | 20000 +2000 | 76.2 = | 112 +1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound ND2080A | 800 +100 | 500 = | 20000 +2000 | 75 -1.2 | 111 = | close | 8 Ω vs 16 Ω: amp load changes · min crossover 800 Hz > 700 Hz: raise the XO | + |
| Beyma CD-320Fe/Ti | 800 +100 | 500 = | 18000 = | 76.2 = | 110 -1 | close | 8 Ω vs 16 Ω: amp load changes · min crossover 800 Hz > 700 Hz: raise the XO | + |
| Beyma CD-320Nd/Ti | 800 +100 | 500 = | 18000 = | 76.2 = | 110 -1 | close | 8 Ω vs 16 Ω: amp load changes · min crossover 800 Hz > 700 Hz: raise the XO | + |
| Radian 760NEO | 800 +100 | 500 = | 20000 +2000 | 76.2 = | 111.5 +0.5 | close | min crossover 800 Hz > 700 Hz: raise the XO | + |
| Radian 760NEO | 800 +100 | 500 = | 20000 +2000 | 76.2 = | 111.5 +0.5 | close | 8 Ω vs 16 Ω: amp load changes · min crossover 800 Hz > 700 Hz: raise the XO | + |
| Faital PRO HF1440 | 700 = | 500 = | 20000 +2000 | 86 +9.8 | 109 -2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound ND2060A | 800 +100 | 500 = | 20000 +2000 | 75 -1.2 | 110 -1 | close | min crossover 800 Hz > 700 Hz: raise the XO | + |
Compare the closest 3 against the 760 →
Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.