Radian 5210
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 67 Hz |
| Qts | 0.43 |
| Qes | 0.45 |
| Qms | 9.718 |
| Vas | 16.7 L |
| Sd | 295.1 cm² |
| Xmax | 4.7 mm |
| Re | 5 Ω |
| Bl | 13.9 T·m |
| Mms | 41.2 g |
| Pe | 375 W |
| Sensitivity | 94.5 dB |
Alignment hint
| EBP | 149 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 10NTLW3500 | 64 -3 | 0.45 +0.02 | 18.1 +1.4 | 6.4 +1.7 | 94 -0.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FH500 | 65 -2 | 0.42 -0.01 | 19.2 +2.5 | 7.25 +2.55 | 95 +0.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10CLA64 | 74 +7 | 0.42 -0.01 | 18.5 +1.8 | 5 +0.3 | 96 +1.5 | close | 250 W vs 375 W: lower power handling | + |
| P.Audio SN-10MB | 70 +3 | 0.397 -0.03 | 19 +2.3 | 5 +0.3 | 95.6 +1.1 | close | + | |
| Faital PRO 10FH530 | 67 = | 0.39 -0.04 | 20.2 +3.5 | 7.45 +2.75 | 96 +1.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10CLA64 | 72 +5 | 0.41 -0.02 | 21 +4.3 | 4.5 -0.2 | 96 +1.5 | close | 16 Ω vs 8 Ω: amp load changes · 250 W vs 375 W: lower power handling · Xmax 4.5 mm < 4.7 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW3500 | 65 -2 | 0.35 -0.08 | 16 -0.7 | 7.9 +3.2 | 95 +0.5 | close | + | |
| Beyma 10MCS500 | 70 +3 | 0.366 -0.06 | 18.8 +2.1 | 4.4 -0.3 | 95.7 +1.2 | usable | Xmax 4.4 mm < 4.7 mm: lower excursion-limited SPL | + |
| LaVoce WAF102.52 | 66 -1 | 0.412 -0.02 | 23.5 +6.8 | 4.5 -0.2 | 96 +1.5 | usable | Xmax 4.5 mm < 4.7 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW2500 | 66 -1 | 0.39 -0.04 | 20.9 +4.2 | 7.6 +2.9 | 96 +1.5 | usable | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 5210 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.