Radian 2216Neo
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 40 Hz |
| Qts | 0.19 |
| Qes | 0.199 |
| Qms | 3.3 |
| Vas | 114 L |
| Sd | 880 cm² |
| Xmax | 9 mm |
| Re | 5.4 Ω |
| Bl | 33 T·m |
| Mms | 165 g |
| Pe | 800 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 201 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF LF15N451 | 35 -5 | 0.18 -0.01 | 125 +11 | 9 = | 97 +0.5 | close | + | |
| 18 Sound 15NLW4500 | 35 -5 | 0.2 +0.01 | 126 +12 | 14.5 +5.5 | 96.6 +0.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 15NLW9401 | 40 = | 0.25 +0.06 | 114 = | 10 +1 | 97.5 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 15 SW 115 | 35 -5 | 0.237 +0.05 | 110 -4 | 8.8 -0.2 | 96.6 +0.1 | usable | Xmax 8.8 mm < 9 mm: lower excursion-limited SPL | + |
| Faital PRO 15XL2400 | 32 -8 | 0.21 +0.02 | 113.9 -0.1 | 17.67 +8.67 | 96 -0.5 | usable | + | |
| Beyma 15QLEX1600Fe | 33 -7 | 0.21 +0.02 | 102 -12 | 13 +4 | 96 -0.5 | usable | + | |
| B&C 15SW115 | 34 -6 | 0.22 +0.03 | 105 -9 | 13.5 +4.5 | 96 -0.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Oberton 15PD601 | 38.2 -1.8 | 0.228 +0.04 | 133.31 +19.31 | 8.5 -0.5 | 98 +1.5 | usable | 600 W vs 800 W: lower power handling · Xmax 8.5 mm < 9 mm: lower excursion-limited SPL | + |
| B&C 15NW76 | 39 -1 | 0.21 +0.02 | 143 +29 | 8 -1 | 99 +2.5 | usable | 4 Ω vs 8 Ω: amp load changes · 600 W vs 800 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| B&C 15SW115 | 35 -5 | 0.24 +0.05 | 110 -4 | 13.5 +4.5 | 96 -0.5 | usable | + |
Compare the closest 3 against the 2216Neo →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.