Radian 2216
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38.7 Hz |
| Qts | 0.375 |
| Qes | 0.43 |
| Qms | 2.95 |
| Vas | 183.9 L |
| Sd | 832 cm² |
| Xmax | 4.8 mm |
| Re | 6.2 Ω |
| Bl | 17.7 T·m |
| Mms | 89.2 g |
| Pe | 600 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 90 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 72 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| P.Audio 15BM-500B | 41 +2.3 | 0.374 = | 183.4 -0.5 | 4.8 = | 98.5 +1.5 | close | + | |
| Beyma 15CMV2 | 37 -1.7 | 0.391 +0.02 | 188 +4.1 | 6.5 +1.7 | 96.8 -0.2 | close | 350 W vs 600 W: lower power handling | + |
| 18 Sound 15ND930 | 38 -0.7 | 0.39 +0.02 | 195 +11.1 | 7.5 +2.7 | 97 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| Fane SOVEREIGN PRO 15-600 LF | 40 +1.3 | 0.364 -0.01 | 188 +4.1 | 6.9 +2.1 | 97.9 +0.9 | close | + | |
| Eminence KAPPA 15 LF | 39 +0.3 | 0.384 +0.01 | 159 -24.9 | 5.5 +0.7 | 97.3 +0.3 | close | + | |
| Eminence KAPPA 15 LFA | 39 +0.3 | 0.384 +0.01 | 159 -24.9 | 5.5 +0.7 | 97.3 +0.3 | close | + | |
| Monacor SP-15/200PA | 42 +3.3 | 0.375 = | 197 +13.1 | 4.7 -0.1 | 98.2 +1.2 | close | 200 W vs 600 W: lower power handling · Xmax 4.7 mm < 4.8 mm: lower excursion-limited SPL | + |
| Beyma 15CXA400Nd | 40 +1.3 | 0.358 -0.02 | 196 +12.1 | 6 +1.2 | 97.9 +0.9 | close | 400 W vs 600 W: lower power handling | + |
| Selenium 15PW5 | 40 +1.3 | 0.4 +0.03 | 190 +6.1 | 5.7 +0.9 | 98.3 +1.3 | close | 350 W vs 600 W: lower power handling | + |
| P.Audio E15-350N | 40 +1.3 | 0.359 -0.02 | 201.4 +17.5 | 5.3 +0.5 | 98.2 +1.2 | close | 350 W vs 600 W: lower power handling | + |
Compare the closest 3 against the 2216 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.