Pyle Audio PLPW10D
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 42 Hz |
| Qts | 0.55 |
| Qes | 0.648 |
| Qms | 3.64 |
| Vas | 35.6 L |
| Sd | 330 cm² |
| Xmax | 6 mm |
| Re | 3.4 Ω |
| Bl | 9.2 T·m |
| Mms | 61.6 g |
| Pe | 400 W |
| Sensitivity | 91.8 dB |
Alignment hint
| EBP | 65 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 54.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce SSF102.40 4 Ohms | 43 +1 | 0.56 +0.01 | 30 -5.6 | 5.7 -0.3 | 92.2 +0.4 | close | 250 W vs 400 W: lower power handling · Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| JBL GT2-10 | 43.9 +1.9 | 0.572 +0.02 | 37.9 +2.3 | 5.7 -0.3 | 93.2 +1.4 | close | 160 W vs 400 W: lower power handling · Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| Audison AV10 | 41 -1 | 0.539 -0.01 | 30.7 -4.9 | 7 +1 | 90.4 -1.4 | close | + | |
| Boss Audio MR101 | 44 +2 | 0.55 = | 35 -0.6 | 9 +3 | 88.9 -2.9 | close | 300 W vs 400 W: lower power handling | + |
| Focal 27 WX | 37.4 -4.6 | 0.555 +0.01 | 38.6 +3 | 7.3 +1.3 | 89.8 -2 | close | 8 Ω vs 4 Ω: amp load changes · 250 W vs 400 W: lower power handling | + |
| Morel PRIMO 10 | 35 -7 | 0.558 +0.01 | 38 +2.4 | 8 +2 | 90 -1.8 | close | 300 W vs 400 W: lower power handling | + |
| LaVoce SSF102.40 | 41 -1 | 0.51 -0.04 | 31.91 -3.69 | 8.3 +2.3 | 89 -2.8 | close | 250 W vs 400 W: lower power handling | + |
| LaVoce SSF102.50L V2 | 44 +2 | 0.493 -0.06 | 30.7 -4.9 | 7.1 +1.1 | 90.3 -1.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| LaVoce NBASS10-20-16 | 53 +11 | 0.54 -0.01 | 42.15 +6.55 | 6.3 +0.3 | 93 +1.2 | usable | 16 Ω vs 4 Ω: amp load changes · 150 W vs 400 W: lower power handling | + |
| LaVoce SSF102.40 8 Ohm | 38 -4 | 0.571 +0.02 | 42 +6.4 | 7.7 +1.7 | 88.5 -3.3 | usable | 8 Ω vs 4 Ω: amp load changes · 250 W vs 400 W: lower power handling | + |
Compare the closest 3 against the PLPW10D →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.