Pyle Audio PLD12WD vp
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 25 Hz |
| Qts | 0.674 |
| Qes | 0.9 |
| Qms | 2.68 |
| Vas | 77.3 L |
| Sd | 420 cm² |
| Xmax | 8 mm |
| Re | 4 Ω |
| Bl | 9.5 T·m |
| Mms | 129.6 g |
| Pe | 800 W |
| Sensitivity | 86.3 dB |
Alignment hint
| EBP | 28 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 768 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Focal 30A4 | 24.7 -0.3 | 0.671 = | 86.9 +9.6 | 8.5 +0.5 | 87.3 +1 | close | 250 W vs 800 W: lower power handling | + |
| Focal 30A4 vp | 24.7 -0.3 | 0.671 = | 86.9 +9.6 | 8.5 +0.5 | 87.3 +1 | close | 250 W vs 800 W: lower power handling | + |
| JL Audio 12W0V3-4 | 28.4 +3.4 | 0.67 = | 71.6 -5.7 | 9.3 +1.3 | 88.3 +2 | close | 300 W vs 800 W: lower power handling | + |
| Dayton Audio UM12-22 | 24.9 -0.1 | 0.589 -0.09 | 71.6 -5.7 | 12.5 +4.5 | 87.7 +1.4 | close | 4 Ω vs 8 Ω: amp load changes · 600 W vs 800 W: lower power handling | + |
| Kenwood KFC-W3013 | 25 = | 0.82 +0.15 | 83.7 +6.4 | 7.6 -0.4 | 87.3 +1 | close | 4 Ω vs 8 Ω: amp load changes · 400 W vs 800 W: lower power handling · Xmax 7.6 mm < 8 mm: lower excursion-limited SPL | + |
| Rockford Fosgate P2D4-12 | 27 +2 | 0.581 -0.09 | 70.3 -7 | 10.1 +2.1 | 86.8 +0.5 | close | 400 W vs 800 W: lower power handling | + |
| Dayton Audio RSS315HFA-8 | 25 = | 0.526 -0.15 | 75 -2.3 | 9.9 +1.9 | 85.5 -0.8 | close | 400 W vs 800 W: lower power handling | + |
| JL Audio 12W0V3-4 | 32.09 +7.09 | 0.67 = | 71.64 -5.66 | 11.4 +3.4 | 85.64 -0.66 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 800 W: lower power handling | + |
| Rockford Fosgate P1S2-12 | 25 = | 0.55 -0.12 | 88.3 +11 | 9 +1 | 85.1 -1.2 | usable | 2 Ω vs 8 Ω: amp load changes · 250 W vs 800 W: lower power handling | + |
| Rockford Fosgate P1S4-12 | 25 = | 0.55 -0.12 | 88.3 +11 | 9 +1 | 85.1 -1.2 | usable | 4 Ω vs 8 Ω: amp load changes · 250 W vs 800 W: lower power handling | + |
Compare the closest 3 against the PLD12WD vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.