PRV Audio 10MB500
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50.5 Hz |
| Qts | 0.313 |
| Qes | 0.37 |
| Qms | 2.05 |
| Vas | 46.2 L |
| Sd | 363.1 cm² |
| Xmax | 4.3 mm |
| Re | 6.67 Ω |
| Bl | 15.1 T·m |
| Mms | 39.8 g |
| Pe | 250 W |
| Sensitivity | 94.8 dB |
Alignment hint
| EBP | 136 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 11.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fane SOVEREIGN PRO 10-300SC | 47 -3.5 | 0.329 +0.02 | 45.4 -0.8 | 4.8 +0.5 | 95 +0.2 | close | + | |
| P.Audio E10-200S v2006 | 53 +2.5 | 0.337 +0.02 | 46.9 +0.7 | 4.1 -0.2 | 95.1 +0.3 | close | Xmax 4.1 mm < 4.3 mm: lower excursion-limited SPL | + |
| Beyma 10MW/ND v2 | 49 -1.5 | 0.319 +0.01 | 40.7 -5.5 | 6.1 +1.8 | 94.8 = | close | + | |
| SICA 10 FE 3 CP v2017 | 52 +1.5 | 0.307 -0.01 | 38.6 -7.6 | 4.2 -0.1 | 95.8 +1 | close | Xmax 4.2 mm < 4.3 mm: lower excursion-limited SPL | + |
| Sica 10 Fe 3 CP | 52 +1.5 | 0.31 = | 38.6 -7.6 | 5 +0.7 | 95.9 +1.1 | close | + | |
| SICA 10 L 2.5 SL | 54 +3.5 | 0.326 +0.01 | 43.8 -2.4 | 4 -0.3 | 96.2 +1.4 | close | Xmax 4 mm < 4.3 mm: lower excursion-limited SPL | + |
| Beyma 10G40 v2016 | 45 -5.5 | 0.306 -0.01 | 49 +2.8 | 6.6 +2.3 | 94.5 -0.3 | close | + | |
| Visaton PAW 25/8 | 52 +1.5 | 0.33 +0.02 | 44 -2.2 | 3.5 -0.8 | 94.4 -0.4 | close | Xmax 3.5 mm < 4.3 mm: lower excursion-limited SPL | + |
| SICA 10 L 2.5 SL 8 Ohms | 54.4 +3.9 | 0.326 +0.01 | 43.8 -2.4 | 4 -0.3 | 96.2 +1.4 | close | Xmax 4 mm < 4.3 mm: lower excursion-limited SPL | + |
| SICA 10 L 2.5 SL Z006900 | 54.4 +3.9 | 0.326 +0.01 | 43.8 -2.4 | 4 -0.3 | 96.2 +1.4 | close | Xmax 4 mm < 4.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10MB500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.