Precision Devices PD 156
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50.2 Hz |
| Qts | 0.378 |
| Qes | 0.4 |
| Qms | 6.94 |
| Vas | 120.2 L |
| Sd | 800 cm² |
| Xmax | 6.6 mm |
| Re | 5.74 Ω |
| Bl | 18.4 T·m |
| Mms | 75.2 g |
| Pe | 650 W |
| Sensitivity | 99.2 dB |
Alignment hint
| EBP | 126 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 48.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PD PD 156 | 50.2 = | 0.378 = | 120.2 = | 6.6 = | 99.2 = | close | + | |
| Precision Devices PD156 | 50.15 -0.05 | 0.38 = | 120.17 -0.03 | 9.5 +2.9 | 97 -2.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Eminence KAPPA PRO 15 LF v1 | 46 -4.2 | 0.372 -0.01 | 127.5 +7.3 | 6.4 -0.2 | 98.6 -0.6 | close | Xmax 6.4 mm < 6.6 mm: lower excursion-limited SPL | + |
| 18 Sound 15W1301 | 48 -2.2 | 0.355 -0.02 | 123 +2.8 | 6 -0.6 | 99.3 +0.1 | close | Xmax 6 mm < 6.6 mm: lower excursion-limited SPL | + |
| LaVoce WXF15.400 | 50 -0.2 | 0.38 = | 118 -2.2 | 4.9 -1.7 | 99.3 +0.1 | close | 400 W vs 650 W: lower power handling · Xmax 4.9 mm < 6.6 mm: lower excursion-limited SPL | + |
| LaVoce WXF15.350-8 | 50 -0.2 | 0.38 = | 118 -2.2 | 4.6 -2 | 99.3 +0.1 | close | 350 W vs 650 W: lower power handling · Xmax 4.6 mm < 6.6 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LF | 46 -4.2 | 0.373 -0.01 | 142.2 +22 | 6.7 +0.1 | 98.9 -0.3 | close | + | |
| Oberton 15MB35 | 47.7 -2.5 | 0.336 -0.04 | 115.1 -5.1 | 6.75 +0.15 | 100 +0.8 | close | + | |
| B&C 15 NDL 88 | 45 -5.2 | 0.34 -0.04 | 126 +5.8 | 6.6 = | 99.1 -0.1 | close | + | |
| JBL 2226HPL vp prodance | 49 -1.2 | 0.396 +0.02 | 140.1 +19.9 | 5.8 -0.8 | 99.2 = | close | Xmax 5.8 mm < 6.6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the PD 156 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.