Pioneer PAX30G vp2
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 42.1 Hz |
| Qts | 0.879 |
| Qes | 0.972 |
| Qms | 9.216 |
| Vas | 92.7 L |
| Sd | 552 cm² |
| Xmax | 3 mm |
| Re | 13.5 Ω |
| Bl | 15.6 T·m |
| Mms | 65.8 g |
| Pe | 60 W |
| Sensitivity | 88.2 dB |
Alignment hint
| EBP | 43 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Goldwood GW-1248 | 33.3 -8.8 | 0.933 +0.05 | 103.6 +10.9 | 3 = | 87.2 -1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Pioneer PAX30G vp1 | 36.4 -5.7 | 0.816 -0.06 | 122.3 +29.6 | 3 = | 87.8 -0.4 | usable | + | |
| GRS 12SW-4 | 29.6 -12.5 | 0.991 +0.11 | 90 -2.7 | 4.5 +1.5 | 88.1 -0.1 | usable | 4 Ω vs 16 Ω: amp load changes | + |
| Sphynx SP-31-S | 41 -1.1 | 1.255 +0.38 | 101 +8.3 | 3.8 +0.8 | 88.8 +0.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Visaton WS32AW vp de FREDO51 | 39 -3.1 | 0.765 -0.11 | 115 +22.3 | 5 +2 | 91.5 +3.3 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Fonestar FPW 350 | 52 +9.9 | 0.876 = | 65 -27.7 | 3.7 +0.7 | 91.8 +3.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Visaton WS32AW | 45 +2.9 | 0.857 -0.02 | 47 -45.7 | 3.7 +0.7 | 88.9 +0.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Fane SOVEREIGN 12-125 | 47 +4.9 | 0.796 -0.08 | 113.2 +20.5 | 4.9 +1.9 | 93.8 +5.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| JB Systems SP12/200 vp | 42.9 +0.8 | 1.385 +0.51 | 107.3 +14.6 | 3 = | 89.5 +1.3 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Elokance 12WF500 | 50 +7.9 | 1.102 +0.22 | 99.1 +6.4 | 3.6 +0.6 | 93.2 +5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the PAX30G vp2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.