PHL Audio 7030
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 34 Hz |
| Qts | 0.378 |
| Qes | 0.41 |
| Qms | 4.8 |
| Vas | 260 L |
| Sd | 1280 cm² |
| Xmax | 7.8 mm |
| Re | 5.5 Ω |
| Bl | 23.6 T·m |
| Mms | 193.6 g |
| Pe | 750 W |
| Sensitivity | 97.6 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 104 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 18LEX1000/Nd | 34 = | 0.391 +0.01 | 260 = | 9.4 +1.6 | 97.8 +0.2 | close | + | |
| Beyma 18LEX1000Nd | 34 = | 0.39 +0.01 | 260 = | 11 +3.2 | 98 +0.4 | close | + | |
| Beyma 18LEX1000Fe | 34 = | 0.38 = | 250 -10 | 11 +3.2 | 98 +0.4 | close | + | |
| PHL Audio 7090 | 36 +2 | 0.386 +0.01 | 260 = | 8 +0.2 | 98.2 +0.6 | close | + | |
| Fane SOVEREIGN PRO 18-800 P | 33 -1 | 0.386 +0.01 | 258 -2 | 7.5 -0.3 | 96.4 -1.2 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| PHL Audio 7081 | 34 = | 0.409 +0.03 | 267.6 +7.6 | 7.5 -0.3 | 97.3 -0.3 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| Beyma 18LEX1200FE | 32 -2 | 0.378 = | 277 +17 | 11 +3.2 | 97.4 -0.2 | close | + | |
| Fane SOVEREIGN PRO 18-800P | 34.5 +0.5 | 0.338 -0.04 | 264 +4 | 7.5 -0.3 | 97.6 = | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| PHL Audio 7050 | 36 +2 | 0.369 -0.01 | 260 = | 7.5 -0.3 | 99.3 +1.7 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| PHL Audio 7201ND | 34 = | 0.355 -0.02 | 230 -30 | 8.5 +0.7 | 97.5 -0.1 | close | + |
Compare the closest 3 against the 7030 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.