PHL Audio 4531 v2023
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 46 Hz |
| Qts | 0.399 |
| Qes | 0.43 |
| Qms | 5.51 |
| Vas | 71.9 L |
| Sd | 531 cm² |
| Xmax | 5.6 mm |
| Re | 5.3 Ω |
| Bl | 15.3 T·m |
| Mms | 65.8 g |
| Pe | 300 W |
| Sensitivity | 95.9 dB |
Alignment hint
| EBP | 107 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 33.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PHL Audio 4511 | 48 +2 | 0.406 +0.01 | 74.1 +2.2 | 5.4 -0.2 | 96.2 +0.3 | close | Xmax 5.4 mm < 5.6 mm: lower excursion-limited SPL | + |
| P.Audio SN-12LF | 48 +2 | 0.399 = | 67.9 -4 | 7.2 +1.6 | 96 +0.1 | close | + | |
| Sica 12 PF 3 | 47 +1 | 0.39 -0.01 | 76.5 +4.6 | 5.5 -0.1 | 96.4 +0.5 | close | Xmax 5.5 mm < 5.6 mm: lower excursion-limited SPL | + |
| SICA 12 S 3 CP | 44 -2 | 0.405 +0.01 | 67.5 -4.4 | 6 +0.4 | 95 -0.9 | close | + | |
| Faital PRO 12FH530 | 45 -1 | 0.39 -0.01 | 75.6 +3.7 | 7.5 +1.9 | 97 +1.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Fane SOVEREIGN 12-300 v2024 | 47 +1 | 0.4 = | 80 +8.1 | 5 -0.6 | 96.3 +0.4 | close | Xmax 5 mm < 5.6 mm: lower excursion-limited SPL | + |
| Celestion FTX1225 v2024 | 47.3 +1.3 | 0.396 = | 84.6 +12.7 | 5.9 +0.3 | 96.8 +0.9 | close | + | |
| SB Audience BIANCO-12MW200 | 50 +4 | 0.389 -0.01 | 68.7 -3.2 | 6 +0.4 | 97.2 +1.3 | close | + | |
| Jensen SMOOTH BS 12N/250A | 47 +1 | 0.425 +0.03 | 81.3 +9.4 | 5.5 -0.1 | 96.4 +0.5 | close | Xmax 5.5 mm < 5.6 mm: lower excursion-limited SPL | + |
| Faital PRO 12FH500 | 48 +2 | 0.37 -0.03 | 77.4 +5.5 | 7.25 +1.65 | 96 +0.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 4531 v2023 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.