PHL Audio 3002 v2010
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48.6 Hz |
| Qts | 0.436 |
| Qes | 0.46 |
| Qms | 8.32 |
| Vas | 29 L |
| Sd | 360 cm² |
| Xmax | 4 mm |
| Re | 5.43 Ω |
| Bl | 15.6 T·m |
| Mms | 67.1 g |
| Pe | 200 W |
| Sensitivity | 92.3 dB |
Alignment hint
| EBP | 106 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 17.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Zeuz 10500X | 48.4 -0.2 | 0.445 +0.01 | 34.6 +5.6 | 4.3 +0.3 | 94.5 +2.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Turbosound TS-10W300/8A | 53 +4.4 | 0.415 -0.02 | 31.6 +2.6 | 3.4 -0.6 | 92.4 +0.1 | close | Xmax 3.4 mm < 4 mm: lower excursion-limited SPL | + |
| LaVoce SSF102.50L | 50 +1.4 | 0.475 +0.04 | 25.6 -3.4 | 5.7 +1.7 | 91.4 -0.9 | close | + | |
| Focal 11W 7670 | 44.6 -4 | 0.45 +0.01 | 22.9 -6.1 | 4.2 +0.2 | 92.1 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Focal 10V 6412 | 50 +1.4 | 0.423 -0.01 | 32.8 +3.8 | 3.3 -0.7 | 93.4 +1.1 | close | 100 W vs 200 W: lower power handling · Xmax 3.3 mm < 4 mm: lower excursion-limited SPL | + |
| Focal 27 H | 46.6 -2 | 0.499 +0.06 | 30.4 +1.4 | 5 +1 | 93.7 +1.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Goldwood GW-10PC/4 | 43.1 -5.5 | 0.404 -0.03 | 32.7 +3.7 | 4.8 +0.8 | 92.9 +0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion BN10-300X(4) | 64.2 +15.6 | 0.43 -0.01 | 29.2 +0.2 | 4 = | 93.8 +1.5 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling | + |
| SICA PL10B25S | 57.6 +9 | 0.438 = | 30.9 +1.9 | 4.8 +0.8 | 94.9 +2.6 | close | + | |
| Monacor SPA-10PA | 54 +5.4 | 0.445 +0.01 | 37 +8 | 4 = | 93.5 +1.2 | close | 150 W vs 200 W: lower power handling | + |
Compare the closest 3 against the 3002 v2010 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.