Philips AD9710
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 32 Ω |
| Fs | 50 Hz |
| Qts | 0.63 |
| Qes | 0.87 |
| Qms | 2.28 |
| Vas | 100 L |
| Sd | 298.6 cm² |
| Xmax | 3.2 mm |
| Re | 20.39 Ω |
| Bl | 9.7 T·m |
| Mms | 12.7 g |
| Pe | 60 W |
| Sensitivity | 89.5 dB |
Alignment hint
| EBP | 57 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 385 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence ALPHA-10A | 50 = | 0.59 -0.04 | 82.2 -17.8 | 3.2 = | 95.6 +6.1 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| Eminence LEGEND B810 | 52.1 +2.1 | 0.648 +0.02 | 66.4 -33.6 | 4.7 +1.5 | 88 -1.5 | usable | + | |
| Eminence ALPHA 10 | 50 = | 0.586 -0.04 | 82.2 -17.8 | 3.2 = | 95.7 +6.2 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| Eminence ALPHA 10 A | 50 = | 0.586 -0.04 | 82.2 -17.8 | 3.2 = | 95.7 +6.2 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| Europsonic HP20/150C | 45 -5 | 0.75 +0.12 | 75 -25 | 4.4 +1.2 | 90.3 +0.8 | usable | 16 Ω vs 32 Ω: amp load changes | + |
| Monacor SP-250PA v2017 | 48 -2 | 0.779 +0.15 | 72 -28 | 4.3 +1.1 | 91.7 +2.2 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| Ciare HX255 | 43 -7 | 0.577 -0.05 | 75.9 -24.1 | 4.8 +1.6 | 93.2 +3.7 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| Hyper Phase BF10R | 45 -5 | 0.831 +0.2 | 78 -22 | 3.5 +0.3 | 90.8 +1.3 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| 18 Sound D-103 | 40.6 -9.4 | 0.522 -0.11 | 93.7 -6.3 | 6 +2.8 | 92.5 +3 | usable | 8 Ω vs 32 Ω: amp load changes | + |
| SEAS 25F-WBC vp2 Gils | 35.1 -14.9 | 0.58 -0.05 | 129.6 +29.6 | 4 +0.8 | 90.1 +0.6 | usable | 16 Ω vs 32 Ω: amp load changes | + |
Compare the closest 3 against the AD9710 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.