Philips AD12100 vp N°3

12" · 4 Ω · 100 W · 98.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	4 Ω
Fs	55.3 Hz
Qts	0.519
Qes	0.59
Qms	4.31
Vas	78.2 L
Sd	537.1 cm²
Xmax	3 mm
Re	3.9 Ω
Bl	9.9 T·m
Mms	42.9 g
Pe	100 W
Sensitivity	98.6 dB

Alignment hint

EBP	94 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 91.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Philips AD12100 vp N°2	54.2 -1.1	0.505 -0.01	84.4 +6.2	3 =	98.8 +0.2	close		+
Philips AD12100 vp N°1	55.7 +0.4	0.475 -0.04	80.1 +1.9	3 =	99.3 +0.7	close		+
RCF L 12/565	55 -0.3	0.497 -0.02	75 -3.2	3.8 +0.8	97.3 -1.3	close	8 Ω vs 4 Ω: amp load changes	+
Monacor SPA-112PA	53 -2.3	0.497 -0.02	77 -1.2	4 +1	97.1 -1.5	close	8 Ω vs 4 Ω: amp load changes	+
Eminence DELTALITE 2512 \|	53.1 -2.2	0.52 =	67.44 -10.76	4.9 +1.9	99.6 +1	close	8 Ω vs 4 Ω: amp load changes	+
Monacor SP-12/100PA v2	52.5 -2.8	0.481 -0.04	81.6 +3.4	3.4 +0.4	96.4 -2.2	close	8 Ω vs 4 Ω: amp load changes	+
Monacor SP-12/100PA v1	53.3 -2	0.472 -0.05	74.8 -3.4	3.3 +0.3	96.4 -2.2	close	8 Ω vs 4 Ω: amp load changes	+
Eminence DELTA 12B	58 +2.7	0.48 -0.04	87 +8.8	2.7 -0.3	98.3 -0.3	close	16 Ω vs 4 Ω: amp load changes · Xmax 2.7 mm < 3 mm: lower excursion-limited SPL	+
Monacor SP-12/100PA v3	56.4 +1.1	0.491 -0.03	66.7 -11.5	3 =	96.5 -2.1	close	8 Ω vs 4 Ω: amp load changes	+
Monacor SP-12/100PA v4	52.5 -2.8	0.462 -0.06	77.3 -0.9	3.3 +0.3	96.4 -2.2	close	8 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the AD12100 vp N°3 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.