Phase Linear ALIANTE 10 SI

10" · 8 Ω · 100 W · 84.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	22 Hz
Qts	0.504
Qes	0.62
Qms	2.68
Vas	50.3 L
Sd	364 cm²
Xmax	5.8 mm
Re	4 Ω
Bl	13.1 T·m
Mms	193.2 g
Pe	100 W
Sensitivity	84.4 dB

Alignment hint

EBP	35 · sealed
Sealed Vb (Qtc ≈ 0.71)	≈ 51.9 L

EBP < 50: favours a sealed (closed) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Dayton Audio RSS265HF-8	24.9 +2.9	0.497 -0.01	51.6 +1.3	9.4 +3.6	84.3 -0.1	close		+
Focal SUB10	21 -1	0.526 +0.02	45 -5.3	9 +3.2	84.5 +0.1	close	4 Ω vs 8 Ω: amp load changes	+
Dayton Audio RSS265HF-8 v2018	24.9 +2.9	0.485 -0.02	52.5 +2.2	9.4 +3.6	84.3 -0.1	close		+
Focal 25 A4	23.5 +1.5	0.506 =	49.9 -0.4	4.3 -1.5	85.4 +1	close	Xmax 4.3 mm < 5.8 mm: lower excursion-limited SPL	+
SB Acoustics SW26DAC76-4	22 =	0.467 -0.04	45.3 -5	9.6 +3.8	85.8 +1.4	close	4 Ω vs 8 Ω: amp load changes	+
Hertz Audio ES 250	26.9 +4.9	0.54 +0.04	54 +3.7	9 +3.2	84.4 =	close	4 Ω vs 8 Ω: amp load changes	+
JL Audio 10W1V2-8	26.5 +4.5	0.438 -0.07	49.1009 -1.2	9.906 +4.11	84.7 +0.3	usable		+
JL Audio 10W1V2-4	25.2 +3.2	0.405 -0.1	50.4601 +0.16	9.906 +4.11	84.6 +0.2	usable	4 Ω vs 8 Ω: amp load changes	+
RE Audio REX 10 S4	24.35 +2.35	0.45 -0.05	57.2278 +6.93	15 +9.2	84.1 -0.3	usable	4 Ω vs 8 Ω: amp load changes	+
Wavecor SW263WA01	24 +2	0.44 -0.06	40.5 -9.8	8.7 +2.9	84 -0.4	usable		+

Compare the closest 3 against the ALIANTE 10 SI →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.